Read Sharp MX-2610N / MX-3110N / MX-3610N (serv.man76) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
2/3
[Description]
No.
Item
Details
1
UI
Modification of the problem that the key response occasionally becomes slow on Image
Send screen.
Send screen.
2
UI
Modification of the problem that the username is displayed in the field of the filename on
Details of Job Status.
Details of Job Status.
3
UI
Modification of a failure to delete the job completed from Job Status (Direct print from
USB flash drive). User cannot delete the job on the Job Status screen.
USB flash drive). User cannot delete the job on the Job Status screen.
4
UI
The warning message "Operation is disabled. Please see your administrator for your
assistance." or " This operation is disabled. " was occasionally displayed if IC card
authentication was enabled. This problem has been corrected.
assistance." or " This operation is disabled. " was occasionally displayed if IC card
authentication was enabled. This problem has been corrected.
5
UI
Modification of the problem that Copy Start Key does not move to Ready state when
logging in with User Authentication in the environment where the coin vender and User
Authentication are used in combination.
logging in with User Authentication in the environment where the coin vender and User
Authentication are used in combination.
6
Printer
Modification of the problem that the printed image is occasionally missing when printing
with PS from an Illustrator.
with PS from an Illustrator.
7
Printer
Modification of the problem that the data occasionally cannot be output with "Rendering"
displayed when printing with PS from the Illustrator.
displayed when printing with PS from the Illustrator.
8
Printer
Modification of machine lock up/ printing failure which occurs while printing particular PS
file.
file.
9
Printer
Modification of a failure to print out particular PDF data directly from USB flash drive
10 Printer
Modification of termination of printing particular PDF file without printing entire file. Even
when the data are printed, the print process takes too long.
when the data are printed, the print process takes too long.
11
Printer
Modification of the problem that the pages after 2nd page may be printed in color when
printing the multiple pages in B&W from the application without going through the driver.
printing the multiple pages in B&W from the application without going through the driver.
12 Printer
Modification of blank on first page which occurs if a PDF file created by scan with OCR in
MX-AP14 is output to different MFP by performing Direct Print.
MX-AP14 is output to different MFP by performing Direct Print.
13 Printer
Modification of printing with different font which may occur when downloaded Truetype
fonts are used for printing.
fonts are used for printing.
14 Network
The address registered to a Group disappeared when it is done on web page of main
unit. This problem has been corrected.
unit. This problem has been corrected.
15 Network
Modification of machine lockup (ex. operation panel does not function) due to the
unauthorized memory access caused by defective internal management processing in
WSD module.
unauthorized memory access caused by defective internal management processing in
WSD module.
16 Network
Modification of the problem that the machine may lock up if the timeout error occurs
when performing FSS communication by HTTP communication via Proxy server.
when performing FSS communication by HTTP communication via Proxy server.
17 Network
Modification of a communication error which occurs in case the devices with different
MAC address share same IP address (i.e. load balancer is installed).
MAC address share same IP address (i.e. load balancer is installed).
18 Network
The modification of garbled images which appear while the data communication speed of
a device is 10 Mbps.
a device is 10 Mbps.
19 Network
Modification has been made to be able to switch the setting by Soft SW to enable/disable
another user to log in with IC card while one user logs in with the external authentication:
SIM55-3 SW No. 24 Data 3
0: Enable another user to log in (Default)
1: Disable another user to log in
another user to log in with IC card while one user logs in with the external authentication:
SIM55-3 SW No. 24 Data 3
0: Enable another user to log in (Default)
1: Disable another user to log in
20 Network
Modification of network lockup which occurs during the port scan on tandem port.
21 Network
Modification of the problem that "Protect Settings by Password" feature does not work.
22 Network
Addition of FSS setting to Web Page for Service Personnel.
23 Image Send
Correction of PPD2_PRI jam which occurred under following conditions:
- Fax Soft SW (SW38-8) was set to "Do not output error page in case of fax data
reception error".
- Communication error occurred while receiving Fax image data.
- The device was printing data.
- Fax Soft SW (SW38-8) was set to "Do not output error page in case of fax data
reception error".
- Communication error occurred while receiving Fax image data.
- The device was printing data.
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man76) service manuals if exist.