MX-2610N, MX-3110N, MX-3610N (serv.man75). CCE 1453 Rom Upgrade (11) V 08.20.A1 Bulletin Only - Sharp Copying Equipment Technical Bulletin (repair manual)

mx-2610n, mx-3110n, mx-3610n (serv.man75) technical bulletin
Model
MX-2610N MX-3110N MX-3610N (serv.man75)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
92.64 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / CCE 1453 Rom Upgrade (11) V 08.20.A1 Bulletin Only
File
mx-2610n-mx-3110n-mx-3610n-sm75.pdf
Date

Read Sharp MX-2610N / MX-3110N / MX-3610N (serv.man75) Technical Bulletin online

 
                                        Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
 
 
1/3 
 
Date:  
 
12
th
 May 2015 
Model:   
 
See below 
Ref.:   
 
CCE 1453 
Colour:   
 
White 
Page: 
 
1 of 3 
TECHNICAL BULLETIN 
ROM UPGRADE ..... (12). 
 
1. Model Name: 
MX-2610N/3110N/3610N (except for China and Taiwan) 
 
2. Description: 
ICU, PCL and PCU ROM version has been upgraded. 
These are for field support only. 
ROM control No. 
ICU 
PCL 
PCU 
SCU 
FAX 
E-Manual 
J01 
0820A100 
0820A100 
0308G10b 
0107G100 
0101G100 
0180A100 
    Item of change: See the attached sheets. 
 
 
 
 
ROM Version Combination History Table 
No 
ROM 
control No. 
ICU 
PCL 
PCU 
SCU 
FAX 
E-Manual 
Action 
T/R No 
(11) 
I01 
0810A1 
0800A1b  0307G1 
0107G1 
0101G1 
0180A1 
field support  CCE-1205 
(10) 
I00 
0800A1 
0800A1 
0306G1 
0107G1 
0101G1 
0180A1 
2013/3 Mid  CCE-1138 
(9) 
H01 
0700A1 
0700A1 
0305G1 
0107G1 
0101G1 
0180A1 
2012/8 
CCE-1053 
(8) 
H00 
0700A1 
0700A1 
0304G1 
0107G1 
0101G1 
0180A1 
2012/6 Mid  CCE-1036 
(7) 
G00 
0600A1 
0600A1 
0303G1 
0107G1 
0101G1 
0180A1 
2012/3 Mid  CCE-1008 
(6) 
F00 
0500A1 
0500A1 
0302G1 
0107G1 
0100G1 
0170A1 
2011/12 Mid  CCE-993 
(5) 
E00 
0400A1 
0400A1 
0301G1 
0107G1 
0100G1 
0161A1 
2011/9 Mid 
CCE-960 
(4) 
D00 
0300A1 
0300A1 
0300G1 
0106G1 
0100G1 
0150A1 
2011/7 Mid 
CCE-941 
(3) 
C00 
0200A1 
0200A1 
0201G1 
0105G1 
0100G1 
0130A1 
2011/5 Mid 
CCE-918 
(2) 
B00 
0110A1 
0108A1 
0111G1 
0103G1 
0100G1 
0122A1 
2011/3 Mid 
CCE-894 
(1) 
A16 
0106A1 
0101A1 
0109G1 
0103G1 
0100G1 
0122A1 
2011/2 Mid 
CCE-883 
 
 
 
                                        Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
2/3 
[Description] 
No. 
Item 
Details 
UI 
Modification of the problem that the key response occasionally becomes slow on Image 
Send screen.
 
UI 
Modification of the problem that the username is displayed in the field of the filename on 
Details of Job Status. 
UI 
Modification of a failure to delete the job completed from Job Status (Direct print from 
USB flash drive). User cannot delete the job on the Job Status screen. 
UI 
The warning message "Operation is disabled. Please see your administrator for your 
assistance." or " This operation is disabled. " was occasionally displayed if IC card 
authentication was enabled. This problem has been corrected. 
UI 
Modification of the problem that Copy Start Key does not move to Ready state when 
logging in with User Authentication in the environment where the coin vender and User 
Authentication are used in combination. 
Printer 
Modification of the problem that the printed image is occasionally missing when printing 
with PS from an Illustrator. 
Printer 
Modification of the problem that the data occasionally cannot be output with "Rendering" 
displayed when printing with PS from the Illustrator. 
Printer 
Modification of machine lock up/ printing failure which occurs while printing particular PS 
file. 
Printer 
Modification of a failure to print out particular PDF data directly from USB flash drive 
10  Printer 
Modification of termination of printing particular PDF file without printing entire file. Even 
when the data are printed, the print process takes too long. 
11 
Printer 
Modification of the problem that the pages after 2nd page may be printed in color when 
printing the multiple pages in B&W from the application without going through the driver. 
12  Printer 
Modification of blank on first page which occurs if a PDF file created by scan with OCR in 
MX-AP14 is output to different MFP by performing Direct Print. 
13  Printer 
Modification of printing with different font which may occur when downloaded Truetype 
fonts are used for printing. 
14  Network 
The address registered to a Group disappeared when it is done on web page of main 
unit. This problem has been corrected. 
15  Network 
Modification of machine lockup (ex. operation panel does not function) due to the 
unauthorized memory access caused by defective internal management processing in 
WSD module. 
16  Network 
Modification of the problem that the machine may lock up if the timeout error occurs 
when performing FSS communication by HTTP communication via Proxy server. 
17  Network 
Modification of a communication error which occurs in case the devices with different 
MAC address share same IP address (i.e. load balancer is installed). 
18  Network 
The modification of garbled images which appear while the data communication speed of 
a device is 10 Mbps. 
19  Network 
Modification has been made to be able to switch the setting by Soft SW to enable/disable 
another user to log in with IC card while one user logs in with the external authentication: 
 
SIM55-3 SW No. 24 Data 3 
0: Enable another user to log in (Default) 
1: Disable another user to log in 
20  Network 
Modification of network lockup which occurs during the port scan on tandem port. 
21  Network 
Modification of the problem that "Protect Settings by Password" feature does not work. 
22  Network 
Addition of FSS setting to Web Page for Service Personnel. 
23  Image Send 
Correction of PPD2_PRI jam which occurred under following conditions: 
- Fax Soft SW (SW38-8) was set to "Do not output error page in case of fax data 
reception error". 
- Communication error occurred while receiving Fax image data. 
- The device was printing data. 
 
 
 
                                        Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
3/3 
 
 
No. 
Item 
Details 
24  Copy 
Modification of PPD2_PRI jam: 
The paper jam occurs during a Copy job when original size is directly entered by setting 
larger size in X direction and smaller size in Y direction and "Repeat Layout" is set using 
large size paper such as A3/B4 size paper (ex. 400×30 on A3 size paper) 
25  Main unit control 
Modification of a failure to execute a job while machine is in the state of "toner near end" 
26  Main unit control 
Occasionally, toner quantity jumps to 5%. This problem has been corrected. 
27  Main unit control 
Modification of the problem that the color changes before and after the halftone process 
control if the correction amount of halftone process control largely changes from the 
previous value. 
28  Main unit control 
Modification of the problems that FAX receiving may stop after reaching to the preset 
limit or the job may disappear when printing because the internal processing at the time 
of job completion cannot work correctly. 
29  Main unit control 
To improve the lines being too thin during the copy in B/W, the laser power correction 
control by developer bias has been implemented: 
 
Sim55-1 SW No.9 Data3 
0: OFF 
1: ON (Factory default) 
 
*Color balance adjustment needs to be performed after changing Soft SW.    Before 
updating the firmware, please return the set values already changed as the 
countermeasure for image quality to the default value, and then perform the color 
balance adjustment. 
 
 
Page of 3
Display

Download Sharp MX-2610N / MX-3110N / MX-3610N (serv.man75) Technical Bulletin

Here you can read online and download Sharp MX-2610N / MX-3110N / MX-3610N (serv.man75) Technical Bulletin in PDF. MX-2610N / MX-3110N / MX-3610N (serv.man75) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-2610N / MX-3110N / MX-3610N (serv.man75) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.