Read Sharp MX-2610N / MX-3110N / MX-3610N (serv.man224) Technical Bulletin online
[Example 2]
After performing control level adjustments for the standard toner concentration, insertion of
the toner cartridge did not make the machine ready, therefore, the following operations were
performed. As a result, F2-64 to 67 errors or F2-40 to 43 errors are displayed.
While the message, "Refilling toner, please wait." is displayed on the LCD, do not perform
the following 3 operations. The duration of the "Refilling toner, please wait." message is 30
seconds to 6 minutes.
Operation
the toner cartridge did not make the machine ready, therefore, the following operations were
performed. As a result, F2-64 to 67 errors or F2-40 to 43 errors are displayed.
While the message, "Refilling toner, please wait." is displayed on the LCD, do not perform
the following 3 operations. The duration of the "Refilling toner, please wait." message is 30
seconds to 6 minutes.
Operation
1). Turning the power OFF and then ON.
2). Opening and closing the front cabin, right door, etc.
3). Performing a simulation.
(Cause)
2). Opening and closing the front cabin, right door, etc.
3). Performing a simulation.
(Cause)
A function to detect the amount of toner that is dripped from the MX-2310U has been added.
After performing control level adjustments for the standard toner concentration and when
inserting a toner cartridge for the first time, the function detects the amount of toner dripped
and whether or not toner is being dripped from the toner cartridge.
When the "Refilling toner, please wait." message is displayed on the LCD, the machine is in
toner drip volume detection mode.
In this status, if the above operations (Power OFF/ON) are performed, the toner drip volume
detection mode will be reset and have to be run again. As a result, over toner error may
occur causing F2-64 to 67 or F2-40 to 43 errors to be displayed.
While the message, "Refilling toner, please wait." is displayed, do not perform the above
three operations until the machine is in ready status.
After performing control level adjustments for the standard toner concentration and when
inserting a toner cartridge for the first time, the function detects the amount of toner dripped
and whether or not toner is being dripped from the toner cartridge.
When the "Refilling toner, please wait." message is displayed on the LCD, the machine is in
toner drip volume detection mode.
In this status, if the above operations (Power OFF/ON) are performed, the toner drip volume
detection mode will be reset and have to be run again. As a result, over toner error may
occur causing F2-64 to 67 or F2-40 to 43 errors to be displayed.
While the message, "Refilling toner, please wait." is displayed, do not perform the above
three operations until the machine is in ready status.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-827
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man224) service manuals if exist.