Read Sharp MX-2610N / MX-3110N / MX-3610N (serv.man216) Technical Bulletin online
No. Item
details
10
Main unit
authentication related
authentication related
From a secured user login state, performing the login/logout operation would, in some
cases, cause the "Please wait one moment..." screen to freeze. This glitch has been
corrected.
cases, cause the "Please wait one moment..." screen to freeze. This glitch has been
corrected.
11 FAX
related
If a FAX send start and a FAX receive simultaneously occurred, the FAX would not send,
and further FAX jobs would be retained, resulting in FAX send not being performed. This
glitch has been corrected.
and further FAX jobs would be retained, resulting in FAX send not being performed. This
glitch has been corrected.
12 FAX
related
Depending on the timing, after recovering from power saving mode and then going back
into power saving mode, in some cases an "F6-00" error would occur. This glitch has
been corrected.
into power saving mode, in some cases an "F6-00" error would occur. This glitch has
been corrected.
13 FAX
related
Immediately after start receiving or when a power irregularity occurred while receiving
pages, an "NG350000" error would occur. Then, there are cases where the machine
would change between the [Printing]
pages, an "NG350000" error would occur. Then, there are cases where the machine
would change between the [Printing]
[Ready] displays. This glitch has been
corrected.
14
Image transfer related
During scan to shared folder transfer, [User Name/Password Incorrect] error would occur,
resulting in scan failure. This glitch has been corrected.
resulting in scan failure. This glitch has been corrected.
15
Image transfer related
Using Network Scanner Tool Lite and Network Scanner Tool, performing a PDF scan with
the MFP would cause a TIFF file to be scanned. This glitch has been corrected.
the MFP would cause a TIFF file to be scanned. This glitch has been corrected.
16
Image transfer related
Performing multiple sheet scanning on the glass surface would cause reserved job
overflow to be displayed, resulting in scan failure. This glitch has been corrected.
overflow to be displayed, resulting in scan failure. This glitch has been corrected.
17
System setting related
In [System Settings]
[Network Settings], if DHCP is [Enabled], the IP address would be
input. This glitch has been corrected.
18
System setting related
In [Security Settings]
[Port Settings], [Send data backup] setting has been added.
When this setting is set to disabled (default), the address book cannot be updated by the
print driver.
print driver.
19
Web page related
Even if the [Restore to factory setting] is pressed, the images registered in the [Home
Screen Setting] in the main unit web menu would not be deleted, instead they would
remain. This glitch has been corrected.
Screen Setting] in the main unit web menu would not be deleted, instead they would
remain. This glitch has been corrected.
20 Other
When the [FAX Address Confirmation Function] is enabled, [Scan to USB Memory] would
not be possible. This glitch has been corrected.
not be possible. This glitch has been corrected.
21 Other
There are cases where the page numbers in the communication records table would not
be displayed correctly. This glitch has been corrected.
be displayed correctly. This glitch has been corrected.
22 Other
If power saving mode is entered while USB memory is attached, after recovering from
power saving mode, there are cases where the following phenomena occur. This glitch
has been corrected.
power saving mode, there are cases where the following phenomena occur. This glitch
has been corrected.
- The USB memory icon on the LCD panel would not be displayed.
- Performing USB memory scan would cause the [An error occurred while attempting to
access the memory device.] error to be displayed.
- During USB memory scan, if up one directory folder was pressed on the select save
location screen, the move icon would be displayed. However, touching this icon would
cause [Please wait one moment...] to be displayed and the machine would freeze,
making recovery only possible through cycling the main power.
cause [Please wait one moment...] to be displayed and the machine would freeze,
making recovery only possible through cycling the main power.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE894
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man216) service manuals if exist.