Read Sharp MX-2610N / MX-3110N / MX-3610N (serv.man206) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-941
[Description]
No.
Item
Details
1
Address book related
From the print driver, address book acquisition could not be performed. This problem has
been corrected.
been corrected.
2
Address book related
A check box "Apply addresses in sending mode only" has been added under [System
Settings]
Settings]
[FAX/Image Sending]
[Operation Settings]. Only address to the contacts
of the mode, refined by job type, can now be selected. (Default: Checked)
3
Address book related
On the "Recent Addresses" display, if the dial input number is registered to the address
book after sending with direct dial input, "Recent Addresses" display would not be
updated to show the registered name of the number and it would remain as the direct dial
(number). The registered name will now update.
book after sending with direct dial input, "Recent Addresses" display would not be
updated to show the registered name of the number and it would remain as the direct dial
(number). The registered name will now update.
4
Address book related
From the address list screen, a contact name of a contact registered to a group couldn’t
be confirmed. As an improvement, for addresses that are registered to a group, the
display of the "Address/Number" field will display as follows.
be confirmed. As an improvement, for addresses that are registered to a group, the
display of the "Address/Number" field will display as follows.
- Two line display
- 1st line displays the contact name (for direct input, the "Direct input" will be displayed).
- 2nd line will display the address or number.
5
Main unit
authentication related
authentication related
Card authentication used with the ELWISE (Large ELWISE) card can now be supported.
When using the ELWISE card, enter a setting value “107” in [User administration]
[Card type/Card reader setting].
6
Main unit
authentication related
authentication related
When LDAP server setting and LAN settings are not completed, the authentication
response for unregistered cards was slower. As an improvement, if the LDAP server
settings are not completed, after searching through the main unit general registered user
search with the card ID, unregistered cards will immediately return an authentication error
without the LDAP authentication.
response for unregistered cards was slower. As an improvement, if the LDAP server
settings are not completed, after searching through the main unit general registered user
search with the card ID, unregistered cards will immediately return an authentication error
without the LDAP authentication.
7
Main unit
authentication related
authentication related
When automatic logout is enabled on Felica (IDM) card authentication, if the card was
used for repeated fast operations, the card would not be detected. This problem has
been corrected.
used for repeated fast operations, the card would not be detected. This problem has
been corrected.
8
UI related
The check boxes "Display position in system settings" and "Enable the link for the
displayed position" has been added under [System Settings]
displayed position" has been added under [System Settings]
[Operation Settings]. In
the setting mode screen upper, the menu position currently displayed can be
confirmed.(Default: Checked)
confirmed.(Default: Checked)
9
UI related
The settings file for the IC card user area settings can now be confirmed whether or not
the setting has been completed. In addition, to clear the settings file, a "Clear" key has
been added to [User Administration]
the setting has been completed. In addition, to clear the settings file, a "Clear" key has
been added to [User Administration]
[Card Area Settings].
10
UI related
In [System Settings]
[Device Settings], one-sided/two-sided print switch settings for
list print have been added.
11
UI related
On the settings screen where date and time can be specified, when the setting buttons
“+” and “-” are pressed, the date and time now operate in a loop.
“+” and “-” are pressed, the date and time now operate in a loop.
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man206) service manuals if exist.