MX-2610N, MX-3110N, MX-3610N (serv.man19). MX2610 3110 Software Setup Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 15

Read Sharp MX-2610N / MX-3110N / MX-3610N (serv.man19) User Guide / Operation Manual online

13
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
Installation by specifying the machine's address
When the machine cannot be found because it is not powered on or otherwise, installation is possible by entering the 
name (host name) or IP address of the machine.
If the machine is being used on an IPv6 network, after you have installed the software as explained below, change the 
port as explained in "
Changing to a Standard TCP/IP Port
" (page 
30
).
When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR 
ALL SOFTWARE)" (p
age 7), perform the steps below.
1
Click the [Printer Driver] button.
To install the PC-Fax driver, click the [PC-Fax Driver] 
button on the "Disc 2" CD-ROM.
* The above screen appears when using the 
"Disc 1" CD-ROM.
2
Click the [Custom installation] button.
3
When you are asked how the printer is 
connected, select [LPR Direct Print 
(Specify Address)] and click the [Next] 
button.
4
Enter the name (host name) or IP 
address of the machine and click the 
[Next] button.
Checking the IP address of the machine 
(page 6)
DUMMY
If the machine is being used on an IPv6 network, 
enter any numbers or characters.
Page of 45
Display

Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man19) service manuals if exist.