MX-2610N, MX-3110N, MX-3610N (serv.man172). MX-2610N-3610N - Combined MFP Firmware Version 07.00.A1_A (Production Run Date June 2012) - Bulletin Only - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

Read Sharp MX-2610N / MX-3110N / MX-3610N (serv.man172) Technical Bulletin online

 
                                                                                                                                       
CCE-1036   
 
 
 
 
 
No. Item 
Details 
14 Printer 
With the user authentication, the log-in name which would be recorded to the job 
log when the invalid user executes the print job under the condition that the invalid 
user is able to print ("Disable Printing by Invalid User" is OFF) has been changed 
as below: 
 
[Before the change] 
User Unknown/ PC Login Name 
 
[After the change] 
User Name specified on the driver/ Login Name specified on the driver 
15 Printer 
When printing the special data that the specification of the number of download 
font was 65535, the PCL XL error occurred.  This problem has been corrected. 
16 Network 
When using "Scan to Network Folder", if the Network Folder was specified not with 
the IP address but with the server name (15 characters for the hostname), in some 
cases, the machine hanged up and could not send the data.  This problem has 
been corrected. 
17 Network 
There were some cases where Scan to E-Mail failed under the network environment 
that a large amount of ARP packets were running.  This problem has been 
corrected. 
18 Network 
19 Network 
When editing the address from the Web Page of the machine, it was slow to display 
the certain address. 
This problem has been corrected. 
20 Network 
When scanning with OSA, if the application server was Microsoft-IIS/Ver.7.0 or later 
version, the communication error occurred during the data sending by HTTP.   
This problem has been corrected. 
21 
Sharp Desk Mobile 
Modification has been made not to display the registration confirmation message 
on the operation panel of the main unit when registering the profile with Scan 
function of Sharp Desk Mobile. 
22 Other 
As the further improvement of the issue that it took some time to browse the data 
in the NAS folder when using NAS function of the machine, the SMB protocol 
control and file access control have been more improved. 
23 Other 
When the "Tray Auto Switch" setting is OFF, the fusing cleaning page would be 
output as the blank page.  This problem has been corrected.  
24 Other 
In the environment where more than 1,000 users log on to one MFP with the 
authentication like schools, in some cases, the U2 error message would appear 
even though the U2 error did not occur.  This problem has been corrected.  
25 Other 
Modification has been made to change the frequency to obtain the information of 
the remaining toner using MIB with SOFT SW (SIM55-3).   
 
 SW No. 32  Data 2 
  0: every 25% (Default) 
  1: every 5% 
 
 
 
 
 
Page of 3
Display

Download Sharp MX-2610N / MX-3110N / MX-3610N (serv.man172) Technical Bulletin