Read Sharp MX-2610N / MX-3110N / MX-3610N (serv.man172) Technical Bulletin online
CCE-1036
[Description]
No. Item
Details
1 UI
In some cases, the icon on the Home screen was not displayed. This problem has
been corrected.
been corrected.
2 UI
Even though the "Disable Registration of Program" was selected in System
Settings, the user program could be deleted. This problem has been corrected.
(Modification has been made to prohibit the deletion of the program and the
change of the program name when the "Disable Registration of Program" is
selected.)
Settings, the user program could be deleted. This problem has been corrected.
(Modification has been made to prohibit the deletion of the program and the
change of the program name when the "Disable Registration of Program" is
selected.)
3 UI
When authenticating the user, if the operation was locked due to entering the
wrong password three times, it was not unlocked even over 5 minutes passage
after the power switch on the panel was turned OFF/ON. This problem has been
corrected.
wrong password three times, it was not unlocked even over 5 minutes passage
after the power switch on the panel was turned OFF/ON. This problem has been
corrected.
4 UI
When the default was set to the Copy screen and the user authentication was
enabled, if the Toner Empty occurred, the message "Change the toner cartridge"
without the [OK] button would be displayed, and the authentication password
could not be input. This problem has been corrected. <Modification has been
made to display the message "Change the toner cartridge" with the [OK] button
when the authentication is enabled (before log-in)>.
enabled, if the Toner Empty occurred, the message "Change the toner cartridge"
without the [OK] button would be displayed, and the authentication password
could not be input. This problem has been corrected. <Modification has been
made to display the message "Change the toner cartridge" with the [OK] button
when the authentication is enabled (before log-in)>.
5 UI
When using MFP for a long time without entering the 1W Energy Save mode, in
some cases, the operation panel became unresponsive. This problem has been
corrected.
some cases, the operation panel became unresponsive. This problem has been
corrected.
6 UI
The message when entering the password for the encrypted PDF has been
changed.
[Before the change]
Enter the password?
[Yes] [No]
[After the change]
Please enter Password.
[Cancel] [OK]
changed.
[Before the change]
Enter the password?
[Yes] [No]
[After the change]
Please enter Password.
[Cancel] [OK]
7 Machine
Control
For the enhancement of the jam processing performance at the fusing section, the
modification has been made to perform the operation of the fusing pressure
release also when the paper jam occurs with OHP/Glossy paper mode.
modification has been made to perform the operation of the fusing pressure
release also when the paper jam occurs with OHP/Glossy paper mode.
8 Machine
Control
There were some cases where the temperature correction for the LSU registration
adjustment did not work correctly under the influence of the dehumidification
heater, which would lead up to the registration shift. For the reason above, the
modification has been made to get the LSU temperature correction to work
properly when the dehumidification heater is ON and when it is OFF.
adjustment did not work correctly under the influence of the dehumidification
heater, which would lead up to the registration shift. For the reason above, the
modification has been made to get the LSU temperature correction to work
properly when the dehumidification heater is ON and when it is OFF.
9
Authentication
Control
Control
When the user name could not be taken from LDAP with the network
authentication, the first 16- character of the log-in name used for the network
authentication was previously used. Now the modification has been made to use
the log-in name directly without cutting off at the first 16-character.
authentication, the first 16- character of the log-in name used for the network
authentication was previously used. Now the modification has been made to use
the log-in name directly without cutting off at the first 16-character.
10
Authentication
Control
Control
When registering the IC Card on User List in System Settings, if the IC card was set
to the card reader before the operation of the card registration was performed, the
IC Card could not be registered.
This problem has been corrected.
to the card reader before the operation of the card registration was performed, the
IC Card could not be registered.
This problem has been corrected.
11
Authentication
Control
Control
When the log-in user did not conduct the appropriate log-out processing and left
the machine with the error like Cover Open displayed on the operation panel, the
next user could not log in. This problem has been corrected.
the machine with the error like Cover Open displayed on the operation panel, the
next user could not log in. This problem has been corrected.
12 Copier
Modification has been made to store also the paper size for the bypass tray on
Copy Job Program.
Copy Job Program.
13 Copier
When turning OFF/ON the machine after the custom paper size was registered as
the Inch-size, the data would be printed only in the smaller area than the area of the
registered size. This problem has been corrected.
the Inch-size, the data would be printed only in the smaller area than the area of the
registered size. This problem has been corrected.
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man172) service manuals if exist.