Read Sharp MX-2610N / MX-3110N / MX-3610N (serv.man14) Service Manual online
MX-3610N MX-2010U/2310U/3111U/2610N/3110N/3610N (MAIN UNIT) 2 – 3
3)
While pressing the lever, pull out the developing unit to
remove.
remove.
4)
Open the cover to remove.
There are two types of the developing unit; (1) the DV cover is
fixed with the DV cover fixing screw, and (2) the DV cover is
fixed with a hook only.
For the type where the DV cover is fixed only a hook, do not
use a screw for fixing.
Otherwise, the DV roller may be damaged.
For the type where the DV cover is fixed with the fixing screw,
there is a groove in the fixing screw hole section as shown in
the figure below.
In some production lots, a sheet is attached instead of this.
fixed with the DV cover fixing screw, and (2) the DV cover is
fixed with a hook only.
For the type where the DV cover is fixed only a hook, do not
use a screw for fixing.
Otherwise, the DV roller may be damaged.
For the type where the DV cover is fixed with the fixing screw,
there is a groove in the fixing screw hole section as shown in
the figure below.
In some production lots, a sheet is attached instead of this.
5)
Loading developer to the developing units.
Be sure to shake the bag of developer thoroughly before pour-
ing into the developing unit.
ing into the developing unit.
When pouring the developer into the unit, use care to not get
developer in to the drive section.
developer in to the drive section.
6)
Attach the cover.
7)
Shake the developing unit several times horizontally and
strongly.
strongly.
2
1
1
2
2
1
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man14) service manuals if exist.