Read Sharp MX-2610N / MX-3110N / MX-3610N (serv.man108) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
2/3
- Modification and identification of Cleaner seal F/R
Length of the fiber on Cleaner seal F/R changed from "4 mm" to "3 mm" along with the change in
shape of cleaner frame. The corner of the seal is cut off to identify the part after change.
Cleaner seal F
Cleaner seal R
Before After
Before After
Additional parts
- Transfer cleaner brush (PBRSR0289FCZZ)
- Brush drive gear (NGERH2026FCZZ)
- 1st transfer brush bearing (NBRGP1001FCZZ)
- E ring (XRESP30-06000)
- E ring (XRESP20-04000)
Mounting position of additional parts (They are mounted to cleaner frame.)
- Addition of an identification label for 1st transfer cleaner unit
E ring (XRESP30-06000)
E ring (XRESP20-04000)
E ring (XRESP30-06000)
1st transfer brush bearing
(NBRGP1001FCZZ)
Transfer cleaner brush
(PBRSR0289FCZZ)
Brush drive gear
(NGERH2026FCZZ)
1st transfer brush bearing
(NBRGP1001FCZZ)
Cleaner frame (LFRM-1472FCZ1)
An identification label is attached here.
Position of the label to identify new unit
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man108) service manuals if exist.