Read Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man8) Service Manual online
MX-3100N MX-FXX2 21 – 4
I. Clear the FAX related software switches.
1)
Switch the operation panel to the copy mode and use the key
operation [P], [
operation [P], [
∗], [C], and [∗] to enter the simulation mode.
2)
Use the numeric keys to enter [66] in the main code entry
screen shown below and press the [START] key.
screen shown below and press the [START] key.
3)
Use the numeric keys to enter [02] in the sub-code entry
screen shown below and press the [START] key.
screen shown below and press the [START] key.
4)
Use numeric keys [0] and [1] to enter the desired 8-digit coun-
try code.
After entry, press [SET], [EXECUTE], and [YES] in this order.
try code.
After entry, press [SET], [EXECUTE], and [YES] in this order.
• Country code list screen
* Press the [DEST CODE] button on the initial screen to move to
* Press the [DEST CODE] button on the initial screen to move to
the country code list screen.
To return to the input screen, press the [BACK] button.
To return to the input screen, press the [BACK] button.
J. Clear the image memory.
1)
Switch the operation panel to the copy mode and use the key
operation [P], [
operation [P], [
∗], [C], and [∗] to enter the simulation mode.
2)
Use the numeric keys to enter [66] in the main code entry
screen shown below and press the [START] key.
screen shown below and press the [START] key.
3)
Use the numeric keys to enter [10] in the sub-code entry
screen shown below and press the [START] key.
screen shown below and press the [START] key.
4)
In the submenu screen shown below, press [EXECUTE] on the
touch panel.
After [YES] on the panel lights up, press it.
touch panel.
After [YES] on the panel lights up, press it.
5)
The screen shown below is displayed and memory clear oper-
ation is executed.
ation is executed.
6)
After several minutes, memory clear operation is completed
and the [YES] button goes out. Press the [CA] key to exit from
the simulation mode.
Then the main unit is automatically rebooted.
and the [YES] button goes out. Press the [CA] key to exit from
the simulation mode.
Then the main unit is automatically rebooted.
Country code list
JAPAN
: 00000000
SWITZERLAND
: 10100110
U.S.A.
: 10110101
AUSTRIA
: 00001010
AUSTRALIA
: 00001001
INDONESIA
: 01010100
U.K.
: 10110100
THAILAND
: 10101001
FRANCE
: 00111101
MALAYSIA
: 01101100
GERMANY
: 00000100
INDIA
: 01010011
SWEDEN
: 10100101
PHILIPPINES
: 10001001
NEWZEALAND
: 01111110
HONGKONG
: 01010000
CHINA
: 00100110
RUSSIA
: 10111000
SINGAPORE
: 10011100
SOUTHAFRICA
: 10011111
TW
: 11111110
SPAIN
: 10100000
MIDDLEANDNE
AREAST
AREAST
: 11111101
PORTUGUESE
: 10001011
SLOVAKIA
: 11111100
LUXEMBURG
: 01101001
OTHER3
: 11111011
BELGIUM
: 00001111
FINLAND
: 00111100
CZECH
: 00101110
NORWAY
: 10000010
HUNGARY
: 01010001
DENMARK
: 00110001
GREECE
: 01000110
NETHERLANDS
: 01111011
POLAND
: 10001010
ITALY
: 01011001
BRAZIL
: 00010110
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man8) service manuals if exist.