Read Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man8) Service Manual online
MX-3100N MX-2600N/3100N, MX-2600G/3100G 1 – 5
7)
Supply developer (package part No. 2) in the developer unit.
* Shake the bag of developer with unopened state. After stir-
* Shake the bag of developer with unopened state. After stir-
ring toner and developer in the bag, supply it to the develop-
ing unit.
ing unit.
* When replacing developer, use an extreme care not to drop
developer on the drive section (marked with ({)).
8)
Install the DV cover in the arrow direction A.
* When installing the DV cover, be sure to engage the pawl
* When installing the DV cover, be sure to engage the pawl
with the boss.
9)
Secure the DV cover with the two screws.
10) Shake the developer unit horizontally a few times.
* When supplying developer, do not tilt the developing unit.
11) Install each developer unit.
* When installing the developer unit, be sure to check that the
DV lock lever is open.
12) Secure with fixing screw. Lower the DV lock lever until it clicks
closed.
A
1
2
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man8) service manuals if exist.