Read Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man4) Handy Guide online
39
Document Solutions After Sales Service
Trouble Codes
F1
38
Finisher punch control PWB trouble
39
Finisher punch dust sensor trouble
41
Positioning guide drive motor trouble
43
Saddle alignment motor trouble
45
Saddle staple motor trouble
47
Saddle paper transport motor trouble
50
Finisher incompatibility trouble
F2
22
Discharge lamp trouble (K)
23
Discharge lamp trouble (C)
24
Discharge lamp trouble (M)
25
Discharge lamp trouble (Y)
39
Process thermister trouble
40
Toner empty sensor trouble (K)
41
Toner empty sensor trouble (C)
42
Toner empty sensor trouble (M)
43
Toner empty sensor trouble (Y)
45
Colour image density sensor trouble
49
LSU thermistor trouble
50
Drum phase sensor trouble (K)
51
Drum phase sensor trouble (Colour)
58
Process humidity sensor trouble
64
Toner supply operation trouble (K)
65
Toner supply operation trouble (C)
66
Toner supply operation trouble (M)
67
Toner supply operation trouble (Y)
70
Improper toner cartridge detection (K)
71
Improper toner cartridge detection (C)
72
Improper toner cartridge detection (M)
73
Improper toner cartridge detection (Y)
74
Toner cartridge CRUM error (K)
75
Toner cartridge CRUM error (C)
76
Toner cartridge CRUM error (M)
77
Toner cartridge CRUM error (Y)
78
Image density registration sensor trouble
F3
12
Tray 1 lift operation trouble (main unit)
22
Tray 2 lift trouble (main unit)
F6
00
MFP‐Fax communication trouble
01
Fax board EEPROM read/write error
04
Fax modem operation trouble
21
TEL/LIU PWB & Fax soft switch error
30
Access error to 1‐chip on Fax board
97
Fax PWB incompatibility trouble
98
Fax PWB & Destination information error
H2
00
Thermister open trouble (TH_UM_AD2)
01
Thermister open trouble (TH_LM).
02
Sub thermister open trouble (TH_US).
03
Non contact thermistor compensation
thermister open (TH_UM_AD1)
thermister open (TH_UM_AD1)
H3
00
Fuser high temperature (TH_UM)
01
Fuser high temperature (TH_LM)
02
Fuser high temperature (TH_US)
H4
00
Fuser low temperature (TH_UM_AD2)
01
Fuser low temperature (TH_LM)
02
Fuser low temperature (TH_US)
30
Thermister input abnormality (TH_UM)
H5
01
5 continuous (POD1 not reached) jams
detected.
detected.
H7
10
Low temperature trouble (TH_UM_AD2)
11
Low temperature trouble (TH_LM)
12
Low temperature trouble (TH_US)
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man4) service manuals if exist.