Read Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man116) Technical Bulletin online
Note 1: Check the position of the release lever F and R, when the release joint gear
(24T) is fitted to the joint shaft fixing plate in the fusing unit. See below.
1. Fit the release joint gear (24T) to the joint shaft fixing plate in the fusing unit,
arranging the upper line on the release lever F in a horizontal relationship with
respect to the metal end line of the lower frame F. See Figure 1.
respect to the metal end line of the lower frame F. See Figure 1.
2. Fit the release joint gear (24T) to the joint shaft fixing plate in the fusing unit,
arranging the lower line on the release lever R in a horizontal relationship with
respect to the metal end line of the lower frame R. See Figure 2.
respect to the metal end line of the lower frame R. See Figure 2.
Note 2: Ensure that the numbers of teeth observed next to where the release joint gear (24T)
and the release idle gear engage each other agree with the following numbers of
teeth in the figures below.
teeth in the figures below.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-607
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man116) service manuals if exist.