Read Sharp MX-2310U / MX-3111U (serv.man53) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
2/3
[Description]
No.
Item
Details
1
Printer
Modification of the problem that the printed image is occasionally missing when printing
with PS from an Illustrator.
with PS from an Illustrator.
2
Printer
Modification of the problem that the data occasionally cannot be output with "Rendering"
displayed when printing with PS from the Illustrator.
displayed when printing with PS from the Illustrator.
3
Printer
Modification of machine lock up/ printing failure which occurs while printing particular PS
file.
file.
4
Printer
Modification of a failure to print out particular PDF data directly from USB flash drive
5
Printer
Modification of occasional interruption of batch print
6
Printer
Modification of the problem that the pages after 2nd page may be printed in color when
printing the multiple pages in B&W from the application without going through the driver.
printing the multiple pages in B&W from the application without going through the driver.
7
Printer
Modification of blank on first page which occurs if a PDF file created by scan with OCR in
MX-AP14 is output to different MFP by performing Direct Print.
MX-AP14 is output to different MFP by performing Direct Print.
8
Network
Modification of machine lockup (ex. operation panel does not function) due to the
unauthorized memory access caused by defective internal management processing in
WSD module.
unauthorized memory access caused by defective internal management processing in
WSD module.
9
Network
Modification of the problem that the machine may lock up if the timeout error occurs
when performing FSS communication by HTTP communication via Proxy server.
when performing FSS communication by HTTP communication via Proxy server.
10 Network
Modification of a communication error which occurs in case the devices with different
MAC address share same IP address (i.e. load balancer is installed).
MAC address share same IP address (i.e. load balancer is installed).
11
Network
Modification of network lockup which occurs during the port scan on tandem port.
12 Network
Support for connection to the latest Windows Server
- Supporting NTLMv2 for Scan to SMB
- Supporting Port 445
- Supporting NTLMv2 for Scan to SMB
- Supporting Port 445
13 Network
Modification has been made to enhance the security level for Web access.
Following features have been added/changed to perform after the log-in with [User
Authority: users] or [Administrator Authority: admin]
- Add User Authority (Login Name: User).
- Change the top screen when accessing the web page to Loin screen.
Initial values of access authority and password for User and login Administrator are as
below:
*Access Authority
User Authority (added): Same as the existing operation which can perform on Top
screen.
Administrator Authority: Same as the existing administrator login authority.
*Initial value of password for each authority
User Authority: users
Administrator Authority: admin
*Inheritance of the password already set up
If the passwords for the administrator and user have already set up before updating the
firmware, the passwords already set up will be inherited after the firmware update.
(*Passwords for the administrator and user have already set up will not be reset.)
*Enable/disable the additional features
Those features will be enabled once this firmware is applied.
For the setting change, those features can be switched between ON and OFF on the
setup item of the main unit or by
Following features have been added/changed to perform after the log-in with [User
Authority: users] or [Administrator Authority: admin]
- Add User Authority (Login Name: User).
- Change the top screen when accessing the web page to Loin screen.
Initial values of access authority and password for User and login Administrator are as
below:
*Access Authority
User Authority (added): Same as the existing operation which can perform on Top
screen.
Administrator Authority: Same as the existing administrator login authority.
*Initial value of password for each authority
User Authority: users
Administrator Authority: admin
*Inheritance of the password already set up
If the passwords for the administrator and user have already set up before updating the
firmware, the passwords already set up will be inherited after the firmware update.
(*Passwords for the administrator and user have already set up will not be reset.)
*Enable/disable the additional features
Those features will be enabled once this firmware is applied.
For the setting change, those features can be switched between ON and OFF on the
setup item of the main unit or by
checking/unchecking the checkbox of “Restrict Device
Web Page Access Via Password
” in “Security Settings” on the top page of Web page.
Checked: ON(Factory default setting)
Unchecked: OFF
*If you upgrade the firmware of machines in field from ROM control No. H00 (or older) to
this "ROM control No. I00", the default setting will be "Unchecked: OFF".
Click on the first or last page to see other MX-2310U / MX-3111U (serv.man53) service manuals if exist.