MX-2310U, MX-3111U (serv.man24). MX2310 Software Setup Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 23

Read Sharp MX-2310U / MX-3111U (serv.man24) User Guide / Operation Manual online

21
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
CONFIGURING THE PRINTER DRIVER FOR THE 
OPTIONS INSTALLED ON THE MACHINE
After installing the printer driver, you must configure the printer driver settings appropriately for the options that have 
been installed and the size and type of paper loaded in the machine. Follow the steps below to configure the printer 
driver.
X When the PCL printer driver, SAPL-c printer driver or PS printer driver 
is installed
1
Click the [Start] button (
), click 
[Control Panel], and then click [Printer].
• In Windows XP/Server 2003, click the [start] button 
and then click [Printers and Faxes].
• In Windows 2000, click the [Start] button, select 
[Settings], and then click [Printers].
2
Open the printer properties window.
(1) Right-click the printer driver icon of the 
machine.
(2) Select [Properties].
3
Click the [Configuration] tab.
4
Click the [Auto Configuration] button.
The settings are automatically configured based on the 
detected machine status.
* The screen is that of PCL6 printer driver.
The message "Set Tandem Print" is not 
displayed in case of SAPL-c printer driver.
If the PPD driver is installed, see "When the PPD driver is installed" (page 23).
If [Printers and Faxes] does not appear in the [start] 
menu in Windows XP, click the [start] button, click 
[Control Panel], click [Printers and Other Hardware], 
and then click [Printers and Faxes].
If the machine is being used on an IPv6 network, you 
must configure the options manually as explained in "If 
automatic configuration fails" (page 22).

Display

Click on the first or last page to see other MX-2310U / MX-3111U (serv.man24) service manuals if exist.

Random: