MX-2310U, MX-3111U (serv.man187). MAINTENANCE CYCLE CHANGED DUE TO FUSING BELT CHANGE - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Read Sharp MX-2310U / MX-3111U (serv.man187) Technical Bulletin online

 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-893 
Using the following list as a reference, set the SOFT SW based on the maintenance kit or service parts. 
 
 
Model 
name 
Parts code 
Maintenance 
cycle 
Setting Note 
The fusing unit 
attached to the  
main unit. 
MX-2610N 
MX-3110N 
--- 
100K 
11110000  Production from before March 2011.
--- 200K 
11000000 
The fusing belt life has been 
changed from 100K to 200K 
sometime during March 2011  
production. Change the software 
switch settings to 200K.(*1) 
Fusing belt kit 
MX-230FB --- 
100K 
11110000 
--- 
MX-360FB --- 
200K 
11000000 
--- 
Fusing belt 
--- NBLTH0567FCZZ  100K  11110000 
--- 
--- NBLTH0567FCZ1  200K  11000000 
--- 
Fusing 
unit 
Maintenance 
Kit 
MX-260FU --- 
200K 
11000000 
The 200K fusing belt has been 
attached from the first lot of 230V. 
Service 
parts 
--- DUNTW8587DS12  200K  11000000 
The 200K fusing belt has been 
attached from the first lot of 230V. 
 
*1 Excluding MX-2610N/15029303 to 15030293 and MX-3110N/1501303 to 15032993 (model name/serial 
number) machines. 
 
*2 It's difficult to distinguish between 100K and 200K type fusing belt. The way of distinguish is refer to the model 
name or part code. 
 
*3 The fusing belt kit (MX-230FB)for the 100K should be used for the MX-2310U. 
 
- SIM 55-1 (SW No. 17 3rd and 4th digits default value) 
 
 MX-2610N 
MX-3110N 
MX-2310U 
Default value 
00 
00 
11 
Maintenance cycle 
200K 
200K 
100K 
 
Note: the MX230FU and the MX260FU are NOT interchangeable, the fuser harness and 
pressure springs are different 
Page of 2
Display

Download Sharp MX-2310U / MX-3111U (serv.man187) Technical Bulletin