Read Sharp MX-2310U / MX-3111U (serv.man180) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-917(SUK)
4) Before fitting the fuser unit back into the machine please ensure the fuser belt is central to the
orange foam roller. If not rotate by hand using drive gear at rear of the fuser assy until central
orange foam roller. If not rotate by hand using drive gear at rear of the fuser assy until central
- Lasting support (from production)
Changing the position of the heat roller frame joint plate insertion holes of the front side of
the heat roller support frame inhibits the occurrence of the fusing belt slipping to the rear
side.
the heat roller support frame inhibits the occurrence of the fusing belt slipping to the rear
side.
Note) Performing the lasting support on fusing units that have been modified for provisional
support will make the belt slip to the front side. Therefore, do not perform the lasting
support on fusing units that have had the provisional support completed.
support on fusing units that have had the provisional support completed.
1) Change location on the heat roller support frame (front side)
2) Identifying new/old
Click on the first or last page to see other MX-2310U / MX-3111U (serv.man180) service manuals if exist.