MX-2310U, MX-3111U (serv.man160). ROM UPGRADE ... (10) Ver 05.00.G1 - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

 

Sharp Electronics (UK) Ltd., Technical Services Group

 

CCE-984 

[Description] 

No. 

Item 

Details 

1  Printer  

When printing, the characters might not be printed out correctly (printed as "□").  This 
problem has been corrected.   

2  Printer 

There were some cases where the model information of the option desk could not 
correctly be taken when outputting the prints (with the option desk installed), and in this 
case, the image handling was carried out with the option configuration of the tray being 
recognized falsely.  This problem has been corrected. 

3  Printer 

When printing, the gradation area of the image might become the dot-like.  This problem 
has been corrected.  

4  Printer 

When printing the certain PDF file (large size file) with the Multiple Set Print, the 
machine might hang up with the "Printing in progress" displayed during printing.  This 
problem has been corrected. 

5  Printer 

It took some time to output the data from PlanetPress application.  This problem has 
been corrected.   

6  Network 

When the machine entered to the Power Saving mode with LAN being disconnected, the 
communication became impossible even though LAN was connected afterward.  This 
problem has been corrected. 

7  Web Page 

When executing the connection test of LDAP under Quick Settings of Network Settings 
on Web Page, the error occurred even though it was properly connected.  This problem 
has been corrected.   

8 

Main unit 
Authentication 

When logging in with the external authentication, it would automatically be logged out in 
earlier time than the auto logout time which was set.  This problem has been corrected.  

9 

Main unit 
Authentication 

When repeatedly logging in with the OSA external authentication, the connection with 
the server might be disconnected.  This problem has been corrected.  

10 

Main unit 
Authentication 

The password authentication for Hold Only might fail with OSA external authentication.  
This problem has been corrected.   

11 

Toner 
Replenishment 
Control 

The reduction of toner concentration is detected under the environment of the low copy 
volume but there were some cases where the DV recovery mode by the process control 
except the process control for the travelling distance was not performed.  This problem 
has been corrected. 

12 

Toner 
Replenishment 
Control 

In very rare case, the toner replenishment control before the shut-off etc might not be 
performed.  This problem has been corrected.    

13  UI 

When using the Document Filing function, if trying to select the file from the operation 
panel, the error message might be displayed and then the machine might become 
inoperative.  This problem has been corrected.  

14  UI 

When printing from the Document Filing with Thumbnail mode, the machine might hang 
up.  This problem has been corrected.  

15  Scanner 

If the paper jam occurred at the document feeder when using the scanner function, the 
scanning might not continue with the "Please wait" message being displayed even after 
the jam was cleared.  This problem has been corrected.  

16  Image Send 

If the window size of the recipient becomes full when sending the direct SMTP, the 
wrong 1-byte data might be sent out, which caused E7-93(8F) at the recipient side.  This 
problem has been corrected. 

17  Image Send 

After the occurrence of I-Fax reception error, the machine might hang up by the 
message "Please wait" upon the power OFF/ON.  This problem has been corrected.