Read Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man9) Service Manual online
MX-2300/2700 N/G SPECIFICATIONS 2 – 8
*1: The scanner mode allows setting the default address. To
transmit data, users only have to set the original and press the
start key.
start key.
*2: Function to set up a text message that will be added
automatically to the message body upon mail transmission.
Editing upon transmission is not allowed.
Editing upon transmission is not allowed.
*3: When disabled, the address registration is not allowed either.
*4: Except for FTP, Desktop, SMB, USB memory, Broadcast.
*4: Except for FTP, Desktop, SMB, USB memory, Broadcast.
e. Specification of Multiple Addresses
* Broadcast transmission by scanner, Internet Fax and Fax is
allowed. (Monochrome only)
f. Transmission function
g. Reception function
*1: The auto wake up print for Internet Fax is a pseudo night-time
mode with main power source (primary) switch ON and main
unit power (secondary) switch OFF. Following the interval of
the reception confirmation cycle, it allows reception of the data
from a POP server (if there are any) and launch the main unit
for output. (It cannot attain the pseudo night-time mode if the
main power source (primary) switch is off. In this case, this
function is not supported.)
unit power (secondary) switch OFF. Following the interval of
the reception confirmation cycle, it allows reception of the data
from a POP server (if there are any) and launch the main unit
for output. (It cannot attain the pseudo night-time mode if the
main power source (primary) switch is off. In this case, this
function is not supported.)
*2: This function saves all received data in memory and starts out
put after password entry. (Confidential reception is excluded.)
Setting only on the reciver side.
Setting only on the reciver side.
Shortcut for address
selection (quick
key)
selection (quick
key)
Use the 10-key to call up registered numbers of
addresses.
addresses.
CC/BCC sending
Yes
---
Subjet
Selective/direct entry from the list
File name
Selective/direct entry from the list
Sender name
Selective/direct entry
from the list/selection
from LDAP server
from the list/selection
from LDAP server
---
(1 default address fixed
as sender name)
(1 default address fixed
as sender name)
Transmission
message (message
body)
message (message
body)
Selective/direct entry from the list.
(Number of characters: Maximum of 1800 half-size
characters (888 full size characters))
(Number of characters: Maximum of 1800 half-size
characters (888 full size characters))
Preset mail footer *2
Yes
Disable direct entry
transmission *3
transmission *3
Yes
Disable PC- Fax
sending
sending
Yes
Disable Internet Fax
sending
sending
Yes
Mode
Scanner
Internet Fax
Broadcast
Yes (500 destinations)
(e-mail/FTP/Desktop
allowed)
(e-mail/FTP/Desktop
allowed)
Yes (500 destinations)
Scanner
Internet Fax
Memory transmission
94 destinations in all
Rotated transmission
---
Yes
Scaled transmission
Yes
Enlargement/reduction is allowed only from a
fixed size to another. Reduction may be done
on the receiver side with Fax/Internet Fax
sending.
Enlargement/reduction is allowed only from a
fixed size to another. Reduction may be done
on the receiver side with Fax/Internet Fax
sending.
Recall mode
Error
---
Yes
Busy
---
---
---
Number/time to be
set up through
system setup
set up through
system setup
Long original
transmission
transmission
Yes
Maximum of 800mm (single side only/black-
white 2 values only)
Maximum of 800mm (single side only/black-
white 2 values only)
Change of the number
of pages for each file
of pages for each file
Yes
---
Job partition through
recognition of white
paper.
recognition of white
paper.
No
---
Restriction on
transmission size
transmission size
Yes
---
Large capacity original
mode
mode
Yes
Scanning of thin paper
Yes
Mixed originals feeder
Yes (Random + MIX)
Default date sender
transmission
transmission
---
Yes (ON only)
Mode
Scanner
Internet Fax
Scanner
Internet Fax
Automatic reception
---
Yes
Manual reception
---
Yes
Memory reception
---
Yes
Fixed size reduced
reception
reception
---
Yes
Specified size scaled
reception
reception
---
No
Rotated reception
---
Yes
Setting of received data
print condition
print condition
---
No
2-sided reception
---
Condition setting
through system setting
through system setting
2-in-1 reception
---
No
Automatic reduction
setting upon receiving
A3
setting upon receiving
A3
---
Yes
Automatic reduction
setting upon receiving
letter
setting upon receiving
letter
---
Yes
Address/Domain-
specified reception
allowed
specified reception
allowed
---
Yes (50 domains)
Address/Domain-
specified reception not
allowed. (To be rejected)
specified reception not
allowed. (To be rejected)
---
Yes (50 domains)
Received data bypass
output
output
---
Yes
Reception confirmation
cycle setting
cycle setting
---
Setting by 0-8 hours/
each minute
each minute
POP3 communications
timeout setting
timeout setting
---
Setting by 30-300/every
30 seconds
30 seconds
Index printing
---
No
Body text print select
setting
setting
---
Yes
Transfer function upon
disabling of output.
disabling of output.
---
Yes (1 receiver (of
transfer) registration)
transfer) registration)
Internet Fax/Fax to e-
mail (Transfer of Internet
Fax/Fax reception data
to e-mail, inbound
routing)
mail (Transfer of Internet
Fax/Fax reception data
to e-mail, inbound
routing)
---
Yes
Exit tray setting
---
Yes
Insertion of job
separator sheet
separator sheet
---
No
Staple function of
received data
received data
---
Yes
Auto wake up print *1
---
Yes
Received data print hold
*2
*2
---
Yes
Color toner print when
black toner runs out.
black toner runs out.
---
No
Fax response lamp
---
Yes
Click on the first or last page to see other MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man9) service manuals if exist.