MX-2300N, MX-2700N, MX-2300G, MX-2700G, MX-2300FG, MX-2700FG (serv.man29). Troubleshooting Guide (Hard copy supplied with product). - Sharp Copying Equipment User Guide / Operation Manual. Page 5

This chapter explains what to do when a paper misfeed occurs in the machine.

When a paper misfeed occurs, "A misfeed has occurred." appears in the touch panel and printing stops. In this event, 
touch the [Information] key in the touch panel. When the key is touched, instructions for removing the misfeed will 
appear. Follow the instructions. (The approximate locations of possible misfeeds are indicated by blinking 

marks as 

shown below.)

If you require more information when reading the instructions in the touch panel, see the paper misfeed illustrations on 
the following pages. Refer to the illustration below and then go to the appropriate illustration (1 to 14) for your situation. 

☞

 (1)-(4): page 4, (5)-(10): page 5, (11)-(14): page 6

• When removing misfed paper, do not touch or damage the transfer belt.

• Carefully pull the paper out without tearing it.

• A misfeed may have occurred inside the machine. Check carefully and remove the misfeed.

• If the paper tears, be sure to remove all pieces from the machine.

2-Sided Copy

Output

Special Modes

File

Quick File

Full Color

Color Mode

Auto

Exposure

100%

Copy Ratio

Job Detail

Settings

0

Information

A misfeed has occurred.
Turning M/C off now causes data loss.

Fusing 
area

(1)

(11)

(12)

(13)

(2)

(10)

(8)

(14)

(9)

(3)

(4)

(5)
(6)

(7)

mx2700_gb_trb.book  3 ページ  ２００５年１１月１日　火曜日　午前１１時５８分