MX-2300N, MX-2700N, MX-2300G, MX-2700G, MX-2300FG, MX-2700FG (serv.man16). Revised Nov 11 - Sharp Copying Equipment Parts Guide (repair manual). Page 3

DEFINITION

Rank A : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts
Rank B : Performance/function parts (sensors, clutches, and other electrical parts), consumable parts
Rank E : Unit parts including PWB
Rank D : Preparation parts (External fitting, packing, parts packed together)
Rank C : Parts other than the above (excluding sub components of PWB)

Because parts marked with "

!" is indispensable for the machine safety maintenance and operation, it must be replaced with

the parts specific to the product specification.

F Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model.
F Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order.
F For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.

[NOTE]

* Th

MX-2000F is Japan only.

e

s

e pa

r

ts are supplied by SMF 

<Note for use of the revised Parts Guide>

・Interchangeability of parts is expressed by No1~6 as shown in the table below.

<Interchangeability>

1

Interchangeable.

2

Current type can be used in place of new type.
New type cannot be used in place of current type.

3

Current type cannot be used in place of new type.
New type can be used in place of current type.

4

Not interchangeable.

5

Interchangeable if replaced with same types of releted parts in use.

6

Others.

<Change of Division>

New & Addition

Change

Abolition

Q'uantity (increase) /Others

Q'uantity (decrease)

Correction

<Effective Time>

R /  C

Running Change

・Running Change of Effective Time is expressed as R/C.

・New & Addition, Change, Abolition, and Quantity change are expressed with the marks shown in  the

table below.