Read Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man128) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-382
Procedure
1) Remove the rear plate. (11 screws)
2) Remove the posterior inferior part from the left-side cabinet. (2 screws)
3) Cut the heater-switch cabinet off of the posterior inferior part on the left-side cabinet.
2) Remove the posterior inferior part from the left-side cabinet. (2 screws)
3) Cut the heater-switch cabinet off of the posterior inferior part on the left-side cabinet.
* Be careful not to damage the cabinet.
4) Fix the dehumidifier heater switch (QSW-C9294QCZZ) on the left posterior frame.
* Terminals of the switch should be on the inward side.
5) Fix the posterior inferior part on the left-side cabinet. (2 screws)
6) Affix the heater switch label (TLABZ5256FCZZ).
6) Affix the heater switch label (TLABZ5256FCZZ).
6)-1. Wipe the surface where the label is to be affixed with alcohol.
6)-2. Affix the label onto the concave on the posterior inferior part on the left-side cabinet.
6)-3. Make sure that the label is completely affixed by pressing the entire surface of the label.
6)-2. Affix the label onto the concave on the posterior inferior part on the left-side cabinet.
6)-3. Make sure that the label is completely affixed by pressing the entire surface of the label.
* Check that there are no air-bubbles, and wrinkles on the label when affixed.
Check that the label is affixed straight.
* Do not touch the glue surface. Never reuse the failed labels.
Click on the first or last page to see other MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man128) service manuals if exist.