MX-1800N (serv.man80). ISSUING EXPLANATORY MATERIAL OF JOB LOG CODES. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 7

Read Sharp MX-1800N (serv.man80) Technical Bulletin online

5/5
PRINTER MODE JOB LOG CODE LIST 
CODE
Cause
Item
Remedy
SMON Message
435
* "Disabling of Colour Mode" is selected.
* "Disabling of full color" is selected for User
Authority.
*Disabling of
Devices
*User Authority
* Change the setting to B/W print.
* Cancel “Disabling of full color” by the Administrator.
You don't have the authority to use this function. The
requested job was canceled due to the following reason:
(Color mode: Disabling of full color)
436
* “Disabling of B/W” is selected for User
Authority.
*User Authority
* Change the setting to full color print.
* Cancel “Disabling of B/W” by the Administrator.
You don't have the authority to use this function. The
requested job was canceled due to the following reason:
(Color mode: Disabling of Black and White)
437
* “Disabling of B/W and full color” is selected
for User Authority.
*User Authority
* Cancel “Disabling of B/W” by the Administrator.
You don't have the authority to use this function. The
requested job was canceled due to the following reason:
(Color mode: Disabling of Black and White and full color)
438
* “Only 2-sided print approved” is selected
for User Authority.
*User Authority
* Perform the 2-sided print
* Cancel “Only 2-sided print approved” by the
Administrator.
You don't have the authority to use this function. The
requested job was canceled due to the following reason:
(Only 2-sided print approved)
439
* “1-sided/2-sided print disabled” is selected
for User Authority.
*User Authority
* Cancel “1-sided/2-sided print disabled” by the
Administrator.
You don't have the authority to use this function. The
requested job was canceled due to the following reason:
(1-sided/2-sided print disabled)
43A
"Disabling of Stapler" is selected for User
Authority.
*User Authority
* Not use Stapler.
* Cancel "Disabling of Stapler" by the Administrator.
The requested job was canceled due to the following
reason:
(Staple: Prohibited)
43B
"Disabling of Punch" is selected for User
Authority.
*User Authority
* Not use Punch.
* Cancel "Disabling of Punch" by the Administrator.
The requested job was canceled due to the following
reason:
(Punch: Prohibited)
43C
"Disabling of Folding Unit" is selected for
User Authority.
*User Authority
*Not use Folding Unit.
* Cancel "Disabling of Folding Unit" by the
Administrator.
The requested job was canceled due to the following
reason:
(Folding Unit:Prohibited)
43D
Reserved
Reserved
43E
Reserved
Reserved
43F
Reserved
Reserved
440
Color selected in Document Control of
System Settings does not match the color
selected in Document Control of the driver.
Document Control
Match the color selected in Document Control of
System Settings with the color selected in Document
Control of the driver.
Specified job has been canceled by the reason below:
(B/W or Auto job is sent when Document control
pattern is set to always print in color.)
441
Reserved
Reserved
442
Reserved
Reserved
443
Reserved
Reserved
444
Reserved
Reserved
445
Paper size which cannot be fed exists in the
job.
Paper Size
Check the paper size of job
The requested job was canceled due to the following
reason:
(Incorrect paper size)
446
Paper type which cannot be fed exists in the
job.
Paper Type
Check the paper type of job
The requested job was canceled due to the following
reason:
(Incorrect paper type)
447
Reserved
Reserved
448
"Disabling of Tandem Slave Machine Mode"
is selected.
Tandem Print
* Not use Tandem Print
* Cancel "Disabling of Tandem Slave Machine Mode"
by the Administrator.
The requested job was canceled due to the following
reason:
(Tandem Printing:Disabling of Slave Machine Mode)
449
"Disabling of 3 color" is selected.
* User Authority/
Color Mode
* Not use 3 color.
* Cancel "Disabling of 3 color" with SIM26-50
The requested job was canceled due to the following
reason:
(Color mode: Disabling of 3 color)
44A
"Disabling of 2 color" is selected.
* User Authority/
Color Mode
* Not use 2 color.
* Cancel "Disabling of 2 color" with SIM26-50
The requested job was canceled due to the following
reason:
(Color mode: Disabling of 2 color)
44B
"Disabling of Single color" is selected.
* User Authority/
Color Mode
* Not use single color.
* Cancel "Disabling of single color" with SIM26-50
The requested job was canceled due to the following
reason:
(Color mode: Disabling of Single color)
44C
XPS driver is used.
* xps file is sent during Direct Print
Emulation
* Print with the driver other than XPS.
* Not to print *.xps file when performing Direct Print.
* Enable XPS emulation
The requested job was canceled due to the following
reason:
(XPS is not available) Please check your printer
Page of 13
Display

Click on the first or last page to see other MX-1800N (serv.man80) service manuals if exist.