MX-1800N (serv.man80). ISSUING EXPLANATORY MATERIAL OF JOB LOG CODES. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 6

Read Sharp MX-1800N (serv.man80) Technical Bulletin online

4/5
PRINTER MODE JOB LOG CODE LIST 
CODE
Cause
Item
Remedy
SMON Message
414
* When receiving the data other than the
emulation that the printer supports
* When there’s a tag that TIFF data is
unsupported
Print Data Type
* Please check if the print data is supported.
The requested job was canceled due to the following
reason:
(Data format is not supported)
415
Reserved
Reserved
416
* Paper size and paper type which cannot be
passed to the output tray is selected.
* Paper size and paper type which cannot be
passed is selected on the option connected.
Paper Size/Paper
Type/Output/
Finisher
* Please select the paper size and paper type which
can be passed to the output tray/finisher.
The requested job was canceled due to the following
reason:
(Selected paper cannot be used)
417
Reserved
Reserved
418
Reserved
Reserved
419
Reserved
Reserved
41A
Reserved
Reserved
41B
Reserved
Reserved
41C
Reserved
Reserved
41D
Reserved
Reserved
41E
Reserved
Reserved
41F
Reserved
Reserved
420
Output Tray is disabled or no tray which can
be outputted is available due to the failure.
Output
* Please ask the Administrator.  If it’s not the failure,
ask the Administrator to cancel “Disabling of Output
Tray” and “Disabling of Finisher” from “Disabling of
Devices”.
* Check the delivery section, and then repair it.
The requested job was canceled due to the following
reason:
(Output tray: Prohibitedor failure) Please ask your
administrator.
421
Retention of Sharing Mode is disabled for
User Authority.
DSK, Retention
* Change the setting to any of “No Retention”, “Quick
File Print”, “Sample Print” (with password), “Hold
Only” (with password) or “Hold After Print” (with
password).
*From “System Settings”-> “Disable Settings”,
change the setting of “Disabling of Document Filing”
by the Administrator
The requested job was canceled due to the following
reason:
(Disabling of Sharing Mode)
422
Retention of Confidential Mode is not
approved for User Authority.
DSK, Retention
* Change the setting to either “No Retention” or
Quick File Print.
*From “System Settings”-> “Disable Settings”,
change the setting of “Disabling of Document Filing”
by the Administrator.
The requested job was canceled due to the following
reason:
(Disabling of Confidential Mode)
423
Retention of Sharing Mode and Confidential
Mode is not approved for User Authority.
DSK, Retention
* Change the setting to either “No Retention” or
“Quick File Print.
*From “System Settings”-> “Disable Settings”,
change the setting of “Disabling of Document Filing”
by the Administrator.
The requested job was canceled due to the following
reason:
(Disabling of Storing to the selected folder)
424
“Retention Settings” (all of Quick File,
Sharing, Confidential) is not approved for
User Authority.
DSK, Retention
* Change the setting to "No Retention".
* Ask the Administrator to change “Disabling of
Document Filing” from “System Settings”->
“Enable/Disable Settings”
The requested job was canceled due to the following
reason:
(Disabling of Document Filing)
425
“Disabling of Print Jobs Other Than Print
Hold Job” is selected for User Authority.
DSK, Retention
* Change the setting to either “Hold Only” (without
password) or “Hold Only” (with password)
*From “System Settings”-> “Disable Settings”,
change the setting of “Disabling of Document Filing”
by the Administrator
The requested job was canceled due to the following
reason:
(Disabling of Print Jobs Other Than Hold Job)
426
“Disabling of Print Jobs Other Than Print
Hold Job” and “Disabling of Sharing Mode”
are selected for User Authority.
DSK, Retention
* Change the setting to “Hold Only” (with password).
*Change the setting of “Disabling of Document Filing”
of “System Settings” by the Administrator
The requested job was canceled due to the following
reason:
(Disabling of Print Jobs Other Than Hold Job and
Disabling of Sharing Mode)
427
“Disabling of Print Jobs Other Than Hold
Job” and “Disabling of Confidential Mode”
are selected for User Authority.
DSK, Retention
* Change the setting to “Hold Only” (without
password).
*From “System Settings”-> “Disable Settings”,
change the setting of “Disabling of Document Filing”
by the Administrator
The requested job was canceled due to the following
reason:
(Disabling of Print Jobs Other Than Hold Job and
Disabling of Confidential Mode)
428
“Disabling of Print Jobs Other Than Hold
Job” and “Disabling of Storing to the
selected folder” are selected for User
Authority.
DSK, Retention
*From “System Settings”-> “Disable Settings”,
change the setting of “Disabling of Document Filing”
by the Administrator
The requested job was canceled due to the following
reason:
(Disabling of Print Jobs Other Than Hold Job and
Disabling of Storing to the selected folder)
429
“Disabling of Print Jobs Other Than Hold
Job” is selected and “Retention Settings” (all
of Quick File, Sharing, Confidential) is not
approved for User Authority.
DSK, Retention
*From “System Settings”-> “Disable Settings”,
change the setting of “Disabling of Document Filing”
by the Administrator
The requested job was canceled due to the following
reason:
(Disabling of Print Jobs Other Than Hold Job and
Disabling of Document Filing)
42A
“Disabling of Print Jobs Other Than Hold
Job” and “Disabling of Quick File Mode” are
selected for User Authority.
DSK, Retention
* Change the setting to either “Hold Only” (without
password) or “Hold Only” (with password)
*Change the setting of “Disabling of Document Filing”
of “System Settings” by the Administrator
The requested job was canceled due to the following
reason:
(Disabling of Print Jobs Other Than Hold Job and
Disabling of QuickFile Mode)
42B
Print-Hold is disabled.
DSK, Retention
* Change the setting to No Retention.
* Ask the Administrator to change the “Document
Output Options” from “System Settings” -> “Print Hold
Setting”.
The requested job was canceled due to the following
reason:
(Retention printing:Prohibited)
42C
Reserved
Reserved
42D
Reserved
Reserved
42E
* Tandem Print is selected during Document
Service.
* Print for B/W Data is disabled on B/W
machine for User Authority.
*Document
Service
*User
Authentication
* Tandem function cannot be used during Document
Service.
* Cancel the setting of User Authority(disabling of
B/W) by the Administrator.
The requested job was canceled due to the following
reason:
(Disabling of printing)
42F
User authentication error
Acount Control/
User Authority
* Enter the appropriate username and password.
* Ask the Administrator to create the account.
The requested job was canceled due to the following
reason:
(Invalid user)
430
Reserved
Reserved
431
Reserved
Reserved
432
Reserved
Reserved
433
Reserved
Reserved
434
Reserved
Reserved
Page of 13
Display

Click on the first or last page to see other MX-1800N (serv.man80) service manuals if exist.