Read Sharp MX-1800N (serv.man5) Specification online
MX-1800N SPECIFICATIONS 2 – 7
*1: The scanner mode allows setting the default address. To
transmit data, users only have to set the original and press the
start key.
start key.
*2: Function to set up a text message that will be added
automatically to the message body upon mail transmission.
Editing upon transmission is not allowed.
Editing upon transmission is not allowed.
*3: When disabled, the address registration is not allowed either.
*4: Except for FTP, Desktop, SMB, USB memory, Broadcast.
*4: Except for FTP, Desktop, SMB, USB memory, Broadcast.
e. Specification of Multiple Addresses
* Broadcast transmission by scanner, Internet Fax and Fax is
allowed. (Monochrome only)
f. Transmission function
g. Reception function
*1: The auto wake up print for Internet Fax is a pseudo night-time
mode with main power source (primary) switch ON and main
unit power (secondary) switch OFF. Following the interval of
the reception confirmation cycle, it allows reception of the data
from a POP server (if there are any) and launch the main unit
for output. (It cannot attain the pseudo night-time mode if the
main power source (primary) switch is off. In this case, this
function is not supported.)
unit power (secondary) switch OFF. Following the interval of
the reception confirmation cycle, it allows reception of the data
from a POP server (if there are any) and launch the main unit
for output. (It cannot attain the pseudo night-time mode if the
main power source (primary) switch is off. In this case, this
function is not supported.)
*2: This function saves all received data in memory and starts out
put after password entry. (Confidential reception is excluded.)
Setting only on the reciver side.
Setting only on the reciver side.
h. Report/list function
Shortcut for address
selection (quick
key)
selection (quick
key)
Use the 10-key to call up registered numbers of
addresses.
addresses.
CC/BCC sending
Yes
---
Subjet
Selective/direct entry from the list
File name
Selective/direct entry from the list
Sender name
Selective/direct entry
from the list/selection
from LDAP server
from the list/selection
from LDAP server
---
(1 default address fixed
as sender name)
(1 default address fixed
as sender name)
Transmission
message (message
body)
message (message
body)
Selective/direct entry from the list.
(Number of characters: Maximum of 1800 half-size
characters (888 full size characters))
(Number of characters: Maximum of 1800 half-size
characters (888 full size characters))
Preset mail footer *2
Yes
Disable direct entry
transmission *3
transmission *3
Yes
Disable PC- Fax
sending
sending
Yes
Disable Internet Fax
sending
sending
Yes
Item
Scanner
Internet Fax
Broadcast
Yes (500 destinations)
(e-mail/FTP/Desktop
allowed)
(e-mail/FTP/Desktop
allowed)
Yes (500 destinations)
Item
Scanner
Internet Fax
Memory transmission
94 destinations in all
Rotated transmission
---
Yes
Scaled transmission
Yes
Enlargement/reduction is allowed only from a
fixed size to another. Reduction may be done
on the receiver side with Fax/Internet Fax
sending.
Enlargement/reduction is allowed only from a
fixed size to another. Reduction may be done
on the receiver side with Fax/Internet Fax
sending.
Recall mode
Error
---
Yes
Busy
---
---
---
Number/time to be
set up through
system setup
set up through
system setup
Long original
transmission
transmission
Yes
Maximum of 800mm (single side only/black-
white 2 values only)
Maximum of 800mm (single side only/black-
white 2 values only)
Change of the number
of pages for each file
of pages for each file
Yes
---
Job partition through
recognition of white
paper.
recognition of white
paper.
No
---
Restriction on
transmission size
transmission size
Yes
---
Large capacity original
mode
mode
Yes
Scanning of thin paper
Yes
Mixed originals feeder
Yes (Random + MIX)
Default date sender
transmission
transmission
---
Yes (ON only)
Item
Scanner
Internet Fax
Item
Internet Fax
Automatic reception
Yes
Manual reception
Yes
Memory reception
Yes
Fixed size reduced reception
Yes
Specified size scaled reception
No
Rotated reception
Yes
Setting of received data print
condition
condition
No
2-sided reception
Condition setting through system
setting
setting
2-in-1 reception
No
Automatic reduction setting upon
receiving A3
receiving A3
Yes
Automatic reduction setting upon
receiving letter
receiving letter
Yes
Address/Domain-specified
reception allowed
reception allowed
Yes (50 domains)
Address/Domain-specified
reception not allowed. (To be
rejected)
reception not allowed. (To be
rejected)
Yes (50 domains)
Received data bypass output
Yes
Reception confirmation cycle
setting
setting
Setting by 0-8 hours/each minute
POP3 communications timeout
setting
setting
Setting by 30-300/every 30
seconds
seconds
Index printing
No
Body text print select setting
Yes
Transfer function upon disabling of
output.
output.
Yes (1 receiver (of transfer)
registration)
registration)
Internet Fax/Fax to e-mail (Transfer
of Internet Fax/Fax reception data
to e-mail, inbound routing)
of Internet Fax/Fax reception data
to e-mail, inbound routing)
Yes
Exit tray setting
Yes
Insertion of job separator sheet
No
Staple function of received data
Yes
Auto wake up print *1
Yes
Received data print hold *2
Yes
Color toner print when black toner
runs out.
runs out.
No
Fax response lamp
No
Item
Scanner
Internet Fax
Image sending activity
report
report
Yes
Time-specified output
Output with memory full
* Maximum of 200 times including both
Time-specified output
Output with memory full
* Maximum of 200 times including both
transmission and reception
Transaction report
Yes
Address/phone number
table
table
Yes
Group table
Yes
Program table
Yes
Communication original
contents print
contents print
---
Always print/Upon
error/no print
error/no print
List of addresses
allowed or not allowed
for reception
allowed or not allowed
for reception
---
Yes
Click on the first or last page to see other MX-1800N (serv.man5) service manuals if exist.