Read Sharp MX-1800N (serv.man37) Service Manual online
MX-1800N PWB SECTION Q – 5
c. HL PWB
1) Remove the upper cabinet rear cover.
2) Remove the screws and the connector, and remove the HL
1) Remove the upper cabinet rear cover.
2) Remove the screws and the connector, and remove the HL
PWB.
d. Driver Sub PWB
1) Remove the upper cabinet rear cover.
2) Remove the screws, and remove the driver sub PWB.
1) Remove the upper cabinet rear cover.
2) Remove the screws, and remove the driver sub PWB.
e. Secondary transfer PWB
1) Remove the upper cabinet rear cover.
2) Remove the screws and the connector, and remove the sec-
1) Remove the upper cabinet rear cover.
2) Remove the screws and the connector, and remove the sec-
ondary transfer PWB.
f. Driver Main PWB
1)
1)
Remove the rear cabinet.
2)
Remove the screws and the connector, and remove the driver
main PWB.
main PWB.
g. Primary transfer PWB
1)
1)
Remove the rear cabinet.
2)
Open the control box.
3)
Remove the screws and the connector, and remove the pri-
mary transfer PWB.
mary transfer PWB.
h. MC PWB
1)
1)
Remove the rear cabinet.
2)
Open the control box.
3)
Remove the screws, then remove the fly wheel.
* Installing sequence: (1) C
* Installing sequence: (1) C
→ (2) KM → (3) KM (Each color is
marked.)
* After installation, check to confirm that it is not in contact
with the harness, etc.
C
KM
KM
Click on the first or last page to see other MX-1800N (serv.man37) service manuals if exist.