Read Sharp MX-1800N (serv.man32) Service Manual online
MX-1800N TRANSFER SECTION L – 7
g. Transfer drive roller
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the intermediate transfer belt.
4) Clean the transfer drive roller.
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the intermediate transfer belt.
4) Clean the transfer drive roller.
h. Transfer follower roller /
i. Tension roller
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the intermediate transfer belt.
4) Clean the trasnfer follower roller (A) and the tension roller (B).
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the intermediate transfer belt.
4) Clean the trasnfer follower roller (A) and the tension roller (B).
j. Roller cleaning brush
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the intermediate transfer belt.
4) Check the roller CL brush.
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the intermediate transfer belt.
4) Check the roller CL brush.
k. Registration backup roller
1)
1)
Remove the primary trasnfer unit.
2)
Remove the cleaner unit.
3)
Remove the intermediate transfer belt.
4)
Check the registration backup roller.
l. Cleaner seal /
m. Cleaner seal R
1)
1)
Remove the primary trasnfer unit.
2)
Remove the cleaner unit.
3)
Remove the cleaner seal (A) and the cleaner seal R (B).
* When attaching the seals, position the seals within the spec-
ified ranges, referring to the reference lines as indicated
below.
below.
n. Transfer toner reception seal
1)
1)
Remove the primary trasnfer unit.
2)
Remove the cleaner unit.
3)
Remove the transfer toner reception seal.
A
B
A
B
Reference line
Reference line
0 - 0.3mm
0 - 0.3mm
0 - 0.3mm
Reference line
Click on the first or last page to see other MX-1800N (serv.man32) service manuals if exist.