Read Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man6) Service Manual online
MX-C401 MX-C310/MX-C311/MX-C380/MX-C381/MX-C400/MX-C401 (MAIN UNIT) 1 – 6
6)
Install the waste toner box, and turn the lock lever to the left
until it stops to lock the waste toner box.
until it stops to lock the waste toner box.
7)
Close the front cover.
D. Installation of the operation manual pocket
1)
Install the Operation Manual pocket (included in package)
cover to the left side of the machine.
a)
cover to the left side of the machine.
a)
First, insert the pawl on the lower side of the Operation
Manual pocket.
Manual pocket.
b)
Then, lift the pawl on the upper side and insert it, and slide
down to install.
down to install.
E. Tray size setup
1)
Gently pull out the tray until it stops. If paper remains in the
tray, remove it.
tray, remove it.
2)
Adjust the guide plates A and B to the vertical size and the hor-
izontal size of paper.
The guide plates A and B are movable. Hold the fixing knob to
slide the guide plates A and B to match the paper size.
izontal size of paper.
The guide plates A and B are movable. Hold the fixing knob to
slide the guide plates A and B to match the paper size.
3)
Insert the tray slowly.
The machine automatically detects the set paper size.
The machine automatically detects the set paper size.
F. Specifications setting
Use SIM26 to set to the specifications according to the customer's
request.
request.
To customize one of the following items after destination setting,
change the set value of the item.
change the set value of the item.
G. Image quality check and adjustment
Check the following items regarding to image qualities. For adjust-
ment and checking procedures, refer to [4] ADJUSTMENTS in the
separate Service Manual.
ment and checking procedures, refer to [4] ADJUSTMENTS in the
separate Service Manual.
(1) Image skew check and adjustment
1)
Select ALL in the SIM50-22 mode to execute the automatic
image registration adjustment.
image registration adjustment.
2)
The current skew level is displayed on the SKEW display
menu.
menu.
3)
Write down the displayed skew level.
SIM No
Content
26
6
Destination setting
SIM No
Content
26
3
Auditor specifications, mode setting
18
Toner save mode enable/disable setting (Japan and UK
versions only)
* For the other destinations, this setting is made by the user
versions only)
* For the other destinations, this setting is made by the user
program.
52
Count-up enable/disable setting of non-print paper passing for
each counter
each counter
53
User color calibration enable/disable setting
65
Staple limit quantity setting
Click on the first or last page to see other DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man6) service manuals if exist.