Read Sharp DX-C200P Service Manual online
DXC200/200P NOTE FOR SERVICING - i
NOTE FOR SERVICING
1. Precautions for servicing
• When servicing, disconnect the power plug, the printer cable, the network cable, and the
telephone line from the machine, except when performing the communication test, etc.
It may cause an injury or an electric shock.
It may cause an injury or an electric shock.
• There is a high temperature area inside the machine. Use extreme care when servicing.
It may cause a burn.
• There is a high voltage section inside the machine which maycause an electric shock. Be
careful when servicing.
• Do not disassemble the laser unit. Do not insert a reflectivematerial such as a screwdriver
in the laser beam path. It may damage eyes by reflection of laser beams.
• When servicing with the machine operating, be careful not to squeeze you hands by the
chain, the belt, the gear, and other driving sections.
• Do not leave the machine with the cabinet disassembled. Do not allow any person other
than a serviceman to touch inside the machine. It may cause an electric shock, a burn, or an
injury.
• When servicing, do not breathe toner, developer, and ink excessively. Do not get them in
the eyes. If toner, developer, or ink enters your eyes, wash it away with water immediately,
and consult a doctor if necessary.
• The machine has got sharp edges inside. Be careful not to damage fingers when servicing.
• Do not throw toner or a toner cartridge in a fire. Otherwise, toner may ignite and burn you.
• When replacing a lithium battery on a PWB, only use the specified replacement battery. If a
battery of different specification is used, it may cause a machine malfunction or breakdown.
• When carrying a unit with PWB or electronic parts installed to it, be sure to put it in an
anti-static-electricity bag. It may otherwise cause a machine breakdown or malfunction.
2. Warning for servicing
• Be sure to connect the power cord only to a power outlet that meets the specified voltage
and current requirements. Avoid complex wiring, which may lead to a fire or an electric
shock. It may cause a fire or an electric shock.
• If there is any abnormality such as a smoke or an abnormal smell, interrupt the job and
disconnect the power plug. It may cause a fire or an electric shock.
• Be sure to connect the grounding wire. If an electric leakage occurs without grounding, a
fire or an electric shock may result. To protect the machine and the power unit from
lightening, grounding must be made.
It may cause a burn.
• There is a high voltage section inside the machine which maycause an electric shock. Be
careful when servicing.
• Do not disassemble the laser unit. Do not insert a reflectivematerial such as a screwdriver
in the laser beam path. It may damage eyes by reflection of laser beams.
• When servicing with the machine operating, be careful not to squeeze you hands by the
chain, the belt, the gear, and other driving sections.
• Do not leave the machine with the cabinet disassembled. Do not allow any person other
than a serviceman to touch inside the machine. It may cause an electric shock, a burn, or an
injury.
• When servicing, do not breathe toner, developer, and ink excessively. Do not get them in
the eyes. If toner, developer, or ink enters your eyes, wash it away with water immediately,
and consult a doctor if necessary.
• The machine has got sharp edges inside. Be careful not to damage fingers when servicing.
• Do not throw toner or a toner cartridge in a fire. Otherwise, toner may ignite and burn you.
• When replacing a lithium battery on a PWB, only use the specified replacement battery. If a
battery of different specification is used, it may cause a machine malfunction or breakdown.
• When carrying a unit with PWB or electronic parts installed to it, be sure to put it in an
anti-static-electricity bag. It may otherwise cause a machine breakdown or malfunction.
2. Warning for servicing
• Be sure to connect the power cord only to a power outlet that meets the specified voltage
and current requirements. Avoid complex wiring, which may lead to a fire or an electric
shock. It may cause a fire or an electric shock.
• If there is any abnormality such as a smoke or an abnormal smell, interrupt the job and
disconnect the power plug. It may cause a fire or an electric shock.
• Be sure to connect the grounding wire. If an electric leakage occurs without grounding, a
fire or an electric shock may result. To protect the machine and the power unit from
lightening, grounding must be made.
Click on the first or last page to see other DX-C200P service manuals if exist.