DM-2000 (serv.man2). DM2000 Specifications - Sharp Copying Equipment Specification (repair manual). Page 5

Status

LCD display

Content

Error

Check
Panel

Toner empty
Drum replacement
Cover open
Service call error

Clear
Paper Path

Paper jam
Paper exit tray full

User
setting

Main Menu

Copies

Printing of the set
quantity is made.

Resolution

Printing at the set
resolution is made.

Smoothing

Smoothing
function setting.

Toner Save

Toner save mode
setting

Page Protection

Setting of page
protection function

2-Sided Printing

Setting of duplex
function and
binding direction

Paper Source

Tray select

Paper Size

Paper size select

Orientation

Setting of print
direction

Emulation

Emulation setting

Network
Menu

Set IP Address

IP address
setting is made.

Set Subnet Mask

Subnet Mask
setting is made.

Set Default Gateway

Default Gateway
setting is made.

Enable TCP/IP

Enable/Disable
TCP/IP

Enable Netware

Enable/Disable
Netware

Enable EtherTalk

Enable/Disable
EtherTalk

Reset to Defaults

Reset Print
Server Card to
default

PS2 Menu

Print PS2 Error

Setting of printing
in case of PS
Error

Interface
Menu

I/O Time Out

If data reception
is not completed
within the set
time, it is judged
as a time out
error.

Test
Printing
Menu

Configuration Page

Configuration
page is printed.

PCL Font List

PCL6 Font page
is printed.

PS2 Font List

PS2 Font page is
printed.

b. LED display

ON LINE light

Extinguished

Indicates that the printer is off-
line and data cannot be
transferred or printed. Make
settings from the operation
panel in this mode. Note,
however, that you cannot make
settings if the “Data Remaining”
message is displayed.

Lit

Indicates that the printer is on-
line and data can be transferred
and printed.

DATA light

Extinguished

Indicates that there is no data
being received or processed.

Lit

Indicates that the printer is
receiving or processing print
data.

Blinking

Indicates that there is print data
remaining in memory that has
not yet been printed.

c. Operation keys

LINE key

Changes between the on-line and off-line
modes.
When the printer is on-line, it can receive
data from the computer with which it is
connected.
When the printer is off-line, you can use
operation panel keys to make print settings.
Note, however, that you cannot make settings
if the “Data Remaining” message is displayed.

MENU key

Used to show setting menus on the display in
sequence.

∗

ITEM key

Used to show the setting items of the
selected menu in sequence.

∗

Left arrow key
Right arrow key

Used to change the value of any item.

∗

ENTER key

Used to enter a new value.

∗ Invalid when the printer is on-line.

10/100 Base TX

TCP/IP, IPX/SPX, Ether Talk

10 Base T/2

TCP/IP, IPX/SPX, Ether Talk

(6) PC environment
a. In the case of IBM PC/AT or compatible computers

Computer 
Type

IBM PC/AT or compatible computer equipped with a
bi-directional parallel interface and CD-ROM drive

Operating 
System

Windows 95, Windows 98, Windows NT4.0
Windows 3.1

CPU

Windows 95: 486SX or better
Windows 98: 486DX/66MHz or better (Pentium or
better is recommended.)
Windows NT4.0: 486/25MHz or better

RAM

Windows 95: 8 MB or more (12 MB or more is
recommended.)
Windows 98: 16 MB or more (32 MB or more is
recommended.)
Windows NT4.0: 16 MB or more

DM-2000

2  –  5