CALLISTO V2 (serv.man6). Group Policy Setup Guide for Callisto popup and Windows XP SP2 - Sharp Copying Equipment User Guide / Operation Manual. Page 7

Business I.T. Systems Ltd 

 
 

 
NOTE: If set incorrectly, Group Policy can cause a domain-wide dysfunction. It is 
imperative that you understand the nature and effects of any policy changes made.  
 
The policy created for the domain in the above manner is actually now stored on the domain. 
Rather than save and come back to the local MMC console to edit the policy or make future 
changes, this document will address using the Active Directory Users and Computers MMC 
to modify the policy. This is one of the Domain Controller-side MMCs that will be typically 
used to edit domain-wide policy. Note you must always initially create the policy using a 
workstation on which SP2 has been applied. It is the new modifications to the SP2 Group 
Policy administrative templates that store the information for the Windows Firewall and 
these modifications must first be “copied” to a new policy for them to be available.  

 

1. Log on to a Domain Controller on the domain in which you just created the above 
Policy Object.  

 

2. Open Active Directory Users and Computers via Administrative Tools or by clicking 
Start, Run, typing dsa.msc, then clicking OK.  

 

3. In the Active Directory Users and Computers MMC, make sure that you are connected 
to the domain in which you created the policy, then right click the domain name in the 
left window and select Properties. Now click the Group Policy tab.  

 

Group Policy Set-up for Callisto Pop-up 

 

Page 7