AR-SP6N. Service Manual for ARSP6N, ARRP6N - Sharp Copying Equipment Service Manual (repair manual)

ar-sp6n service manual
Model
AR-SP6N
Pages
24
Size
878.2 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service Manual for ARSP6N, ARRP6N
File
ar-sp6n.pdf
Date

Read Sharp AR-SP6N Service Manual online

CODE : 00Z
q
SERVICE MANUAL
CONTENTS
Parts marked with "
!
" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION
ARSP6N/A1E
Digital copier
Reverse Single 
Pass Feeder (RSPF)
Single Pass Feeder (SPF)
AR-SP6N
 MODEL
AR-RP6N
      
   
[1]
PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
[2]
SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
[3]
UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . .  1
[4]
EXTERNAL VIEW AND INTERNAL STRUCTURE  . . . . . . . . . . .  4
[5]
OPEREATIONAL DESCRIPTIONS  . . . . . . . . . . . . . . . . . . . . . . .  5
[6]
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
[7]
DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . .  8
[8]
MAINTENANCE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15
[9]
ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
AR-SP6N/RP6N
PRODUCT OUTLINE
– 1 –
[1] PRODUCT OUTLINE
Duplex document auto feeder AR-RP6N and document auto feeder 
AR-SP6N attached to a digital copier feeds originals automatically to
allow continuous copying.
[2] SPECIFICATIONS
[3] UNPACKING AND INSTALLATION
1. Unpacking
For unpacking, refer to the figure below.
2. Installation
Turn the main switch of the copier to the “OFF” position and then
remove the power plug of the copier from the outlet.
1. Remove the document cover.
Lift the document cover from the copier and tilt it to the rear side to
remove it.
AR-RP6N
AR-SP6N
Document set direction
Face up
Document set position
Right/Center reference
Document transport 
system
Sheet through type
Document feed sequence
Top take-up feed
Document size
AB series: A3 ~ A5
Inch series: 11 x 17 ~ 8.5 x 5.5
Document weight
56 ~ 90g/m
2
, 15 ~ 24lbs
Document set quantity
Max. 40 sheets (Stack range: within 4mm)
(90g/m
2
: Set capacity = 30 sheets)
Dimensions
583mm (W) x 435mm (D) x 133mm (H)
Weight
About 5.4 kg
About 5.0 kg
Power source
Supplied from the copier. (DC 24V, 5V)
Power consumption
26.4W
21W
Document size detection
On the document feed tray
Detection size
Japan: 
A3, B4, A4, A4R, B5, B5R, A5
Inch series: 
11 x 17, 8.5 x 14, 8.5 x 11,
8.5 x 11R, 8.5 x 5.5
EX AB series: A3, B4, A4, A4R, A5, B5, B5R
Mixture of different 
document sizes
Mixture paper feed: Not available
Random paper feed: Not available
Document reverse
Allowed 
(without 8.5 x 5.5)
Not allowed
Display section (LED)
None
Document exchange 
speed
3
 S, 16 sheets/min (AR-M165/M162)
3
 S, 20 sheets/min (AR-M207)
AR-SP6N/RP6N
UNPACKING AND INSTALLATION
– 2 –
2. Remove the right cabinet.
Remove the screws and open the side door, and remove the right cabinet.
3.  Remove the document glass and the right document 
glass holder.
Remove the screws, remove the document glass from the copier, and
then remove the right document glass holder.
4. Attach the SPF glass holder.
Fit the SPF glass holder to the document glass.
Attach the document glass to the copier and fix it with the screws.
5. Attach the right cabinet.
Reattach the right cabinet to its original position and fix it with the
screws.
6. Cut out the cut-out portion.
Cut out the cut-out portion of the rear cabinet with nippers or the like.
At this time, be careful about the orientation of the nippers so that the
cut plane of the rear cabinet is flat.
7. Attach the automatic document feeder.
Insert the hinge portions of the document feeder into the mounting por-
tions of the copier by holding the feeder at an angle toward the rear
side.
AR-SP6N/RP6N
UNPACKING AND INSTALLATION
– 3 –
8. Connect the relay connector.
Connect the harness of the automatic document feeder to the connec-
tor of the copier and tighten the screws on the connector.
9. Remove the filament tape.
Remove the filament tape located in the positions shown in the illustra-
tion.
10. Attach the intermediate tray. (AR-RP6N only)
Insert the intermediate tray all the way into the document feeder.
Insert the power plug of the copier to the outlet and turn on
the main switch of the copier.
11. Check the SPF scanning position switching setting.
• Execute simulation 53-10 (SPF scanning position switching setting)
and check that the setting value is [1]. (If the value is [0], change it to
[1].)
12. Adjust the white compensation pixels.
• Open the automatic document feeder, execute simulation 63-7 refer-
ring to the service manual, and adjust the automatic white compensa-
tion pixels of the document feeder.
13. Check the copy magnification ratio.
•  Set an original on the document glass and copy it.
Then, set an original in the document feeder tray and copy it.
•  If the magnification ratio of the copy from the document feeder is dif-
ferent from that of the copy from the document glass, execute simula-
tion 48-5 to carry out adjustment referring to the service manual.
14. Check the center displacement.
•  Set an original on the document glass and copy it.
Then, set an original in the document feeder tray and copy it.
• If the center of the copy image from the document feeder is different
from that of the copy image from the document glass, execute simu-
lation 50-12 to carry out adjustment referring to the service manual.
15. Check the top end position.
•  Set an original on the document glass and copy it.
Then, set an original in the document feeder tray and copy it.
•  If the top end position of the copy image from the document feeder is
different from that of the copy image from the document glass, exe-
cute simulation 50-06 to carry out adjustment referring to the service
manual.
Page of 24
Display

Download Sharp AR-SP6N Service Manual (Repair Manual)

Here you can read online and download Sharp AR-SP6N Service Manual in PDF. AR-SP6N service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-SP6N Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.