Read Sharp AR-SP6 (serv.man6) Service Manual online
AR-SP6/RP6
DISASSEMBLY AND ASSEMBLY
– 12 –
4) Pressure release solenoid
■
■
■
■
AR-RP6 only
Note: Make sure the spring pin A is inserted into the slot.
Make sure that the clearance between the position at which force
is applied and the sound deadening sponge is 0.5 ~ 2 mm when
is applied and the sound deadening sponge is 0.5 ~ 2 mm when
the pressure release solenoid plunger is pulled toward the sole-
noid side.
5) RSPF motor / SPF motor
7. Transport section
1) Clutch
Note: When assembling, check that the rib is in the clutch groove A
and fix it with E-ring.
2) Transport roller gear
3) Reverse gate
■
■
■
■
AR-RP6 only
Note: When assembling the inversion gate, apply grease G-484 on the
area A.
3
A
2
0.5 2mm
1
1
2
4
3
2
A
1
1
1
1
1
1
3
2
1
A
A
A
Click on the first or last page to see other AR-SP6 (serv.man6) service manuals if exist.