AR-SP3 (serv.man3). ARSP3-Parts Guide - Sharp Copying Equipment Parts Guide (repair manual). Page 3

Read Sharp AR-SP3 (serv.man3) Parts Guide online

[2] UNPACKING AND INSTALLATION
1. AR-SP3 Instalation Manual
Turn the main switch to the “OFF” position and remove the power plug
from the outlet.
1) Remove the document cover.
Remove the document cover from the copier.
2) Remove the rear cabinet.
Remove the four screws and then remove the rear cabinet.
3) Remove the Mylar sheet from the rear cabinet.
Remove the Mylar sheet that covers the hole for the actuator of
sensor unit.
4) Remove the hinge guides L and R.
Remove the screws (two for each) and then remove the hinge
guides L and R.
5) Attach the hinge guides L and R.
Attach the hinge guides L and R by fitting the pawls (two for
each) into the frame of the copier and secure them with the two
screws (M3 
× 8) for each that have been removed in step 3.
6) Place the SPF on the copier.
AR-SP3
2  –  1
Page of 47
Display

Click on the first or last page to see other AR-SP3 (serv.man3) service manuals if exist.