Read Sharp AR-RP8 Service Manual online
AR-SP8/RP8 DISASSEMBLY AND ASSEMBLY 4 - 1
[4] DISASSEMBLY AND ASSEMBLY
1. AR-SP8 (SPF)
Pickup unit removal
1) Remove three fixing pawls from the bottom of the machine.
2) Remove the front cover and the rear cover.
1) Remove the belt, the paper feed frame Spring, and two harnesses.
2) Remove the pickup unit.
* When installing the parts, be careful of the hole position of the paper
frame Spring.
A. Sensor PWB
1) Remove two screws from the bottom of the pickup unit.
2) Remove the upper cover.
1) Remove two screws.
2) Remove the sensor PWB.
3) Remove the harness.
B. Pickup solenoid
1) Remove two screws.
2) Remove the pickup solenoid
* When installing, hang iron core A on the solenoid arm.
No.
Part name Ref.
A
Sensor PWB
B
Pickup solenoid
C
Clutch
D
Manual paper feed roller, pickup roller
E
Belt
F
SPF motor
G
Paper entry sensor
H
PS roller
I
Paper exit roller
1
2
2
1
1
3
4
3
2
1
1
2
1
1
1
1
2
3
1
2
A
Click on the first or last page to see other AR-RP8 service manuals if exist.