Read Sharp AR-RP8 Service Manual online
AR-SP8/RP8 UNPACKING AND INSTALLATION 2 - 1
[2] UNPACKING AND INSTALLATION
<Before Installation>
For improvement of workability, part of the description in this
manual may be modified without prior notice. In this case, refer to
the service manual.
manual may be modified without prior notice. In this case, refer to
the service manual.
Parts included
Turn the main switch to the "OFF" position and remove the power
plug from the outlet.
plug from the outlet.
1) Remove the document cover.
Remove the document cover from the copier.
2) Remove the rear cabinet.
Remove the three screws and then remove the rear cabinet.
3) Remove the rear cabinet cover.
Remove the screw and then remove the rear cabinet cover.
4) Cut out a part of the rear cabinet cover.
Cut out the cut-out portion of the rear cabinet cover with nippers or
the like. (Be careful about the orientation of the nippers so that the
cross section is flat.)
the like. (Be careful about the orientation of the nippers so that the
cross section is flat.)
5) Remove the hinge guides L and R.
Remove the screws (two for each) and then remove the hinge
guides L and R.
guides L and R.
AR-SP8 Unit
(SPF Unit)
AR-RP8 Unit
(RSPF Unit)
Hinge guide R
Installation manual: 1 sheet
Hinge guide L
Screw (M3 x 8): 1 pc.
Click on the first or last page to see other AR-RP8 service manuals if exist.