AR-PE3 (serv.man9). ARPE3-Printing Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 15

 

This chapter describes printing to the Fiery X3e from Windows computers. You can 
print from a networked Windows computer or a computer using Windows (WINS) 
printing. You can also print to a file so that it can be printed at a remote location (see 

 on page 1-29). In addition to these 

methods, you can download files to the Fiery X3e using Fiery Downloader (see 

), and print documents using Fiery E-mail Services (see 

 

For information about setting up the Windows environment for printing with 

Windows servers connected to the Fiery X3e, see the 

 

. For 

information about connecting to the Fiery X3e over the network, installing printer 
drivers, and installing Fiery

 

®

 

 

 

Once the Fiery X3e printer driver is installed and set to the proper port, as described in 
the 

 

, you can print directly from most Windows 

applications. Set the print options for the job and choose the Print command from 
within your application.

 

To print from Windows computers, install the corresponding PostScript printer driver 
or PCL printer driver. The drivers are included in the Fiery X3e User Software CD.

Once the printer driver and a corresponding printer description file are installed, you 
can specify print settings for a particular job and print it to the Fiery X3e. You can also 
set default print settings using the driver.

To print from Windows applications by connecting your computer to a print server via 
the network, a Novell NetWare, Windows NT/2000/Server 2003, or UNIX server is 
required. For more information, see the 

 

To print from Windows applications without connecting to a print server, 
you can use Server Message Block (SMB) printing. For more information, see the

 

.

Chapter 1:
Printing from 
Windows 
Computers