Read Sharp AR-PE3 (serv.man12) User Guide / Operation Manual online
5
5-6
Setting up the Fiery X3e from a Windows Computer
Network Setup
Network Setup configures the Fiery X3e to receive print jobs over the networks used at
your site. If the Fiery X3e is configured to enable more than one protocol, it
automatically switches to the correct protocol when it receives a print job. When two
network ports are enabled, print jobs can be received over all ports at the same time.
your site. If the Fiery X3e is configured to enable more than one protocol, it
automatically switches to the correct protocol when it receives a print job. When two
network ports are enabled, print jobs can be received over all ports at the same time.
You can view and specify the following network settings in Network Setup:
• Adapters and ports—currently configured network adapters and port settings
• Protocols—including AppleTalk, IPX/SPX, and TCP/IP
• Print Services—including LPD printing (TCP/IP), NetWare printing (PServer),
Windows print sharing (SMB), HTTP support (WWW), Internet Printing Protocol
(IPP) printing, and Port 9100 printing
(IPP) printing, and Port 9100 printing
• E-mail Service—specify the Fiery E-mail Service
Click on the first or last page to see other AR-PE3 (serv.man12) service manuals if exist.