Read Sharp AR-PE1 (serv.man40) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 023.doc
Page: 4 of 18
Setting up the ARPE1
2. Restart the ARPE1. When the ARPE1 completes its power up sequence, the screen
below will be displayed on the LCD panel.
2.1
Press the Menu button (left middle button) once to enter the Functions screen.
2.2
Press the Scroll Down button (left lower button) once on the ARPE1 to view the
remaining selections for the Functions screen.
2.3
Select Run Setup by pressing the second button on the right-hand side. The screen
prompts you to Continue to Setup. Press the controller’s button next to OK and the
ARPE1 enters the setup mode.
ARPE1 enters the setup mode.
2.4
The Setup screen appears on the controller’s display.
Server Name
Idle
Idle
4524 MB 1.0
Info
Print Pages
Suspend Printing
Resume Printing
Shut Down
Suspend Printing
Resume Printing
Shut Down
Functions
Continue to Setup?
Yes
Run Setup
OK
Clear Server
Run Setup
Run Diagnostics
Calibration
Run Setup
Run Diagnostics
Calibration
Functions
Exit Setup
Server Setup
Network Setup
Printer Setup
Server Setup
Network Setup
Printer Setup
Setup
Click on the first or last page to see other AR-PE1 (serv.man40) service manuals if exist.