AR-PB8 (serv.man13). Commands for selection of paper input and output trays. Including Escape codes, PJL commands and Postscript commands. - Sharp Copying Equipment FAQ (repair manual). Page 2

Read Sharp AR-PB8 (serv.man13) FAQ online

Other PJL Commands
@PJL SET RET=ON
select edge enhancement ON/OFF.
Default ON
@PJL SET RESOLUTION=600
300/600.  Default 600
@PJL SET ORIENTATION=PORTRAIT PORTRAIT/LANDSCAPE
@PJL SET DUPLEX=ON
select duplex ON/OFF.  Default OFF
@PJL ENTER LANGUAGE=PCL
set language, forces interpreter into one
mode.  Stops problems of non
recognition of job language type.
PCL/PCLXL/POSTSCRIPT
Page of 2
Display

Download Sharp AR-PB8 (serv.man13) FAQ