Read Sharp AR-PB2 (serv.man7) User Guide / Operation Manual online
PRINTER TROUBLESHOOTING
45
Problem: Paper image is clipped or off the edge of paper.
Check:
Zoom printing?
Solution: Use the proper magnification ratio for printing.
Check:
Different paper size used?
Solution: From the AR-PB2 printer driver, select the paper size to be the same as the original
document, and make sure that the printer has the correct paper in the tray selected.
Check:
Different orientation used?
Solution: From the AR-PB2 printer driver, select the orientation to be the same as the original
document, and make sure that the printer has the correct paper orientation in the tray
selected.
selected.
Problem: Black pages
Check:
Is color image data printed?
Solution: Color image may be printed in black.
Check:
Are the black and white areas reversed?
Solution: Cancel the negative image printing feature in the printer driver.
Problem: Image loss along edges
Check:
Is the image loss outside the print area?
Solution: Check the print area information. (page 48)
Problem: Printer prints out blank pages.
Check:
Is the print face down?
Solution: Face down or face up can be selected. (page 23)
Problem: Printer prints in reverse order.
Check:
Is reverse order selected in the printer driver?
Solution: Set reverse order with face up delivery. (page 18)
Problem: Printing stops in the middle of the print job.
Check:
Too much paper in the output tray?
Solution: Remove the paper from the output tray.
Check:
Has the paper run out?
Solution: Load paper.
Problem: Paper specified from application is not used.
Check:
Is paper selection of driver “Auto”?
Solution: Ensure that the desired paper is set in a paper tray of the printer and select “Auto” in the
paper selection of the printer driver.
Click on the first or last page to see other AR-PB2 (serv.man7) service manuals if exist.