AR-PB2 (serv.man6). ARPB2 Supplement Operation Guide (This includes all installation information needed for the v3 printer drivers, NWSetup, Status Monitor and Sharp Admin software) - Sharp Copying Equipment User Guide / Operation Manual. Page 9

To use a SHARP printer with the AR-PB2 Printer Expansion Kit installed from a Macintosh
computer, the PPD file for Macintosh must be installed to the computer. You will need the following
hardware and software in order to install the PPD file for Macintosh.

Operating system: Mac OS 7.6 to 8.6

CPU: MC 68040 or PowerPC microprocessor

RAM:  16 MB or more for PowerPC microprocessor machine

12 MB or more for 68040 machine

Printer driver: LaserWriter 8 version 8.3.3 or later

To use the printer with a Macintosh computer, an optional network interface card (Print Server
Card) is needed. Also the Macintosh computer must be equipped with an Ethernet port. If your
computer is not equipped with an Ethernet port, install an Ethernet interface.

If your operating system is prior to Mac OS 8.0, you should obtain LaserWriter 8 version 8.3.3 or
later directly from Apple Computer home page.

Before installing the PPD file, check the hardware and software requirements above. If LaserWriter
8 is not installed in your computer, install it from the system CD-ROM supplied with your Macintosh
computer.

1.  Turn on your computer and start the operating system.

2.  Insert the supplied PRINTER UTILITIES CD-ROM into a CD-ROM drive.

3.  Double-click the AR-PB2 icon on the desktop.

4.  Double-click the AR-PB2 Installer icon.

 

The following display will appear.