Read Sharp AR-PB2 (serv.man4) Service Manual online
Limitations in Mode-A Operation
In output devices, The output destinations available for Face-down delivery are Tray2, 3 of 3tray Finisher and Tray2 of 2tray Finisher. These support
the Mode-A operation. Limitations in the Mode-A operation are described as follows:
the Mode-A operation. Limitations in the Mode-A operation are described as follows:
Output Device
ERDH
Reverse Order
Face-up/
down
Basic Operation
Mode
Limitation Control
STD. Face-up
Tray
Tray
ON
Face-up
Mode-B
Mode-B for any job.
OFF
Face-up
Mode-A
Duplex
Mode-B to support the image rotation and Muti-size printing.
Booklet
Mode-B
3trayFIN.
Tray2/3
Tray2/3
ON
Face-up
Mode-B
Paper Size
Mode-B. The paper output destination will be forwarded to Tray
1for the original that includes at least one A6R, 5.5x8.5 in.,post
card, A5 or EXTRA size paper.
1for the original that includes at least one A6R, 5.5x8.5 in.,post
card, A5 or EXTRA size paper.
OFF
Face-up
Mode-A
Paper Size
The paper output destination will be forwarded to Tray 1 for
A6R, 5.5 x 8.5 in. post card, A5 and EXTRA sizes. If above
sized paper is included in the original, remaining output will be
forwarded to Tray 1.
A6R, 5.5 x 8.5 in. post card, A5 and EXTRA sizes. If above
sized paper is included in the original, remaining output will be
forwarded to Tray 1.
Staple
(Tray3)
(Tray3)
Basically, this mode is used to print in the reverse order by the
application. Mode-B for Staple jobs to determine the number of
paper..
application. Mode-B for Staple jobs to determine the number of
paper..
Duplex
Mode-B to support the image rotation and Multi-size printing.
Booklet
Mode-B.
OFF
(by selecting
Face-down)
(by selecting
Face-down)
Face-down
Mode-A
Paper Size
The paper output destination will be forwarded to Tray 1 for
A6R,5.5x8.5 in. post card, A5 and EXTRA sizes. If above sized
paper is included in the original, remaining output will be
forwarded to Tray 1. The forwarded output will be in
incorrect(reverse) order.
A6R,5.5x8.5 in. post card, A5 and EXTRA sizes. If above sized
paper is included in the original, remaining output will be
forwarded to Tray 1. The forwarded output will be in
incorrect(reverse) order.
Duplex
Mode-B to support the image rotation and Multi-size
printing.Face-down delivery.
printing.Face-down delivery.
Booklet
Mode-B because the last page data is required to be output for
the Booklet placement. Face-down delivery.
the Booklet placement. Face-down delivery.
Staple
The selection is inhibited in the driver.
2tray FIN.
Tray2
Tray2
ON
Face-up
Mode-B
Paper Size
Mode-B. The paper output destination will be forwarded to Tray
1for the original that includes paper other than A4, 8.5 x 11in.
and B5 size paper.
1for the original that includes paper other than A4, 8.5 x 11in.
and B5 size paper.
OFF
Face-up
Mode-A
Paper Size
The paper output destination will be forwarded to Tray 1 for
others than A4, Letter and B5 sizes. If above sized paper is
included in the original, remaining output will be forwarded to
Tray 1.
others than A4, Letter and B5 sizes. If above sized paper is
included in the original, remaining output will be forwarded to
Tray 1.
Staple
Mode-B for Staple jobs.
Duplex
Mode-B to support the image rotation and Multi-size printing.
Booklet
Mode-B.
OFF
(by selecting
Face-down)
(by selecting
Face-down)
Face-down
Mode-A
Paper Size
The paper output destination will be forwarded to Tray 1 for
others than A4, Letter and B5 sizes. If above sized paper is
included in the original, remaining output will be forwarded to
Tray 1. The forwarded output will be in incorrect (reverse)order.
others than A4, Letter and B5 sizes. If above sized paper is
included in the original, remaining output will be forwarded to
Tray 1. The forwarded output will be in incorrect (reverse)order.
Duplex
Mode-B to support the image rotation and Multi-size
printing.Face-down delivery.
printing.Face-down delivery.
Booklet
Mode-B because the last page data is required to be output for
the Booklet placement. Face-down delivery.
the Booklet placement. Face-down delivery.
Staple
The selection is inhibited in the driver.
•
N-up is capable of the Mode-A operation.
•
In the Group mode, Face-up/down, and Mode-A/Mode-B control are carried out as well as the Collate mode.
•
Different First Page is capable of the Mode-A operation.
•
OHP interleave paper is capable of the Mode-A operation.
The paper sizes in the table above are those at the job beginning.
When the paper unavailable for output is fed during the processing of
a job, the following operations are performed.
When the paper unavailable for output is fed during the processing of
a job, the following operations are performed.
For example, when 2tray finisher Tray2 / Face-down is selected;
a) When the paper impossible for output, such as A3
•
Mode-B and Face-up printing in N to 1 order is performed and
delivered to Tray 1.
delivered to Tray 1.
•
When the beginning is possible to output like A4 and the job
includes paper that is impossible to output such as A3:
includes paper that is impossible to output such as A3:
•
Mode-A and Face-down printing in 1 to N order is performed.
b) The paper of A3 size is escaped to Tray 1. This causes the
reversed (incorrect) order printing of remaining when the original
output mode was Face-down.
output mode was Face-down.
•
Even if the A4 size paper will come after that of A3 size, the
destination is not returned to Tray 2. In other words, only one
destination change can occur in one job.
destination is not returned to Tray 2. In other words, only one
destination change can occur in one job.
•
If the output has been separated into two output trays, the
following are performed in accordance with incorrect order
printing:
following are performed in accordance with incorrect order
printing:
•
If key operator "OUTPUT METHOD WHEN MEMORY IS
FULL" is set to"1 set", cancel printing after second set.
FULL" is set to"1 set", cancel printing after second set.
AR-PB2
8 – 6
Click on the first or last page to see other AR-PB2 (serv.man4) service manuals if exist.