Read Sharp AR-PB2 (serv.man4) Service Manual online
1) Selecting the print position of WaterMark strings
Function name
Selecting the print position of WaterMark strings
Tab
WaterMark
Name
Position x y
Control
Slide bar
Default
value(X)*
value(X)*
0
Printed at the center of horizontal direction
Default
value(Y)*
value(Y)*
0
Printed at the center of vertical direction
Operation
This item specifies the print position of
WaterMark strings.
The print position will be determined by using
the slide bar for horizontal direction (x) and
vertical direction (y) respectively.
For each direction, the print position will be
determined.
As to the value displayed, the center is 0 and
the left edge orupper edge is the minimum
value of -200 while right edge or lower edge is
the maximum value of 200.
WaterMark strings.
The print position will be determined by using
the slide bar for horizontal direction (x) and
vertical direction (y) respectively.
For each direction, the print position will be
determined.
As to the value displayed, the center is 0 and
the left edge orupper edge is the minimum
value of -200 while right edge or lower edge is
the maximum value of 200.
Remarks
The paper is surrounded by 2 slid bars when
displayed. Among the contents of WaterMark to
be executed, (1)to(7) will be included there.
The paper size and the print orientation at this
point are not included in the display.
displayed. Among the contents of WaterMark to
be executed, (1)to(7) will be included there.
The paper size and the print orientation at this
point are not included in the display.
2) Returning the print position of WaterMark to center
Function name
Returning the print position of WaterMark
strings to the center
strings to the center
Tab
WaterMark
Name
Center
Control
Button
Operation
This item set the print position of WaterMark
strings to the center.
If this button is pressed, for both directions, the
print position will return to 0.
strings to the center.
If this button is pressed, for both directions, the
print position will return to 0.
3) Selecting the size of characters of WaterMark strings
Function name
Selecting the size of characters of WaterMark
Tab
WaterMark
Name
Size
Control
Slide bar
Minimum value
6
6 point characters will be used.
Maximum value
900
900 point characters will be used.
Default value*
72
72 point characters will be used.
Operation
This item specifies the size of characters of
WaterMark strings in the units of point. This
value and the font size selected in the item of
font selection will be associated.
WaterMark strings in the units of point. This
value and the font size selected in the item of
font selection will be associated.
4) Selecting the print angle of WaterMark strings
Function name
Selecting the print angle of WaterMark strings
Tab
WaterMark
Name
Angle
Control
Slide bar
Minimum value
–90
Turning 90 words counterclockwise from
a horizontal position.
a horizontal position.
Maximum value
+90
Turning 90 words clockwise from a
horizontal position.
horizontal position.
Default value*
0
Printing WaterMark strings on a
horizontal position.
horizontal position.
Operation
This item selects the angle to turn WaterMark
strings.
The strings will be turned with the center a
reference point.
strings.
The strings will be turned with the center a
reference point.
5) Selecting WaterMark strings
Function name
Selecting WaterMark strings
Tab
WaterMark
Name
Watermark:
Control
List box
Value*
(none)
No Watermark
Value
TOP SECRET
Strings TOP SECRET will be
used for Watermark.
used for Watermark.
Value
CONFIDENTIAL Strings CONFIDENTIAL will
be used for Watermark.
Value
DRAFT
Strings DRAFT will be used
for Watermark.
for Watermark.
Value
ORIGINAL
Strings ORIGINAL will be
used for Watermark.
used for Watermark.
Value
COPY
Strings COPY will be used
for Watermark.
for Watermark.
Operation
This item selects the strings to be used for
WaterMark print. Theabove values are set at
the time of shipment. The values will
beadded/deleted by pressing [Add]/[Update]
buttons. The strings tobe used for WaterMark
print will be displayed in the values. Butactually
the contents of (1)- (10)will be included as
attributes.Also the values do not need to be
unique.
WaterMark print. Theabove values are set at
the time of shipment. The values will
beadded/deleted by pressing [Add]/[Update]
buttons. The strings tobe used for WaterMark
print will be displayed in the values. Butactually
the contents of (1)- (10)will be included as
attributes.Also the values do not need to be
unique.
6) Adding WaterMark strings
Function name
Adding WaterMark strings
Tab
Watermarks
Name
Add
Control
Button
Operation
This item adds new WaterMark strings.
If this button is pressed, the contents of the
Watermarks tab at this pint will be added.
If this button is pressed, the contents of the
Watermarks tab at this pint will be added.
7) Updating WaterMark Strings
Function name
Updating WaterMark strings
Tab
Watermarks
Name
Update
Control
Button
Operation
This item updates the contents of WaterMark strings.
If this button is pressed, the contents of the
Watermarks tab at this point will be replaced by
the strings specified in "Selecting WaterMark
strings".
If this button is pressed, the contents of the
Watermarks tab at this point will be replaced by
the strings specified in "Selecting WaterMark
strings".
AR-PB2
5 – 17
Click on the first or last page to see other AR-PB2 (serv.man4) service manuals if exist.