Read Sharp AR-PA1 Specification online
Digital copier
LCD panel kit
(AR-PA1)
(AR-PA1)
LCD unit
Mother board
PWB attachment frame
etc.
Printer kit
(PCL)
(PCL)
FAX kit
Options
[1] PRODUCT OUTLINE
This machine is installed to the digital copier which has no functions of FAX and printer, and is used to display the status. It is nor required for
models which have functions of FAX and printer.
models which have functions of FAX and printer.
[2] SYSTEM DIAGRAM
[3] SPECIFICATIONS
LCD digits
20 digits
×
2
Display of status/parameter of printer/FAX*
LED display
Data
ON when data supplied.
Common to printer/FAX
On-line
ON in on-line
OFF in off-line
Keys
Line
Changes between the on-line and off-line modes.
When the printer is on-line, it can receive data from the computer with which it is connected.
When the printer is off-line, you can use operation panel keys to make print settings.
Note, however, that you cannot make settings if the "Data Remaining" message is displayed.
When the printer is on-line, it can receive data from the computer with which it is connected.
When the printer is off-line, you can use operation panel keys to make print settings.
Note, however, that you cannot make settings if the "Data Remaining" message is displayed.
Menu
Used to show setting menus on the display in sequence.
∗
← →
Used to change the value of any item.
∗
Enter
Used to enter a new value.
Item
Used to show the setting items of the selected menu in sequence.
∗
*
For details, refer to the printer kit/FAX kit Service Manual.
[4] UNPACKING AND INSTALLATION
1. Procedures on the copier (operation panel)
A. Copier operation panel disassembly
•
Remove three screws and one connector, and remove the
operation panel.
operation panel.
B. Cover disassembly
•
Remove one screw and disengage two pawls, and remove the
cover.
cover.
AR-PA1
1 – 1
Display
