Read Sharp AR-P350 / AR-P450 (serv.man70) Technical Bulletin online
ARE337
Sharp Electronics (UK) Ltd., Technical Services Group
7. In order to enhance the vibration prevention level for reading the original copy, the
shape of the mirror motor mounting plate AS has been changed. (The mounting plate
can now be bent.)
can now be bent.)
8. Improvement of productivity (Maker change)
9. In order to stabilize the voltage waveshape, a resistor and a capacitor have been
9. In order to stabilize the voltage waveshape, a resistor and a capacitor have been
added to the DC controller circuit board.
10.In order to enhance the finisher level and also improve the productivity, the following
changes have been made.
(1) In order to improve the performance for folding the thick paper, an E ring and a
(1) In order to improve the performance for folding the thick paper, an E ring and a
washer have been added to the link shaft.
(2) To prevent the spring from coming off, the shape of the lower paper feeding guide
hook has been changed.
(3) Improvement of productivity (Change of the shape)
(4) The shape of the screw used inside the top cover has bee changed to the round
(4) The shape of the screw used inside the top cover has bee changed to the round
top screw. This eliminates the problem that may occur while the operator attempts
to correct a paper jam by hand (directly accessing the inside of the top cover) and
thus, makes contact with the screw.
to correct a paper jam by hand (directly accessing the inside of the top cover) and
thus, makes contact with the screw.
(5) The spacer that was used to prevent the thrust unevenness of the Weight flapper is
discontinued since the shape of the Weight flapper has been changed.
(6) The dummy rib that was used to prevent the corners of the paper from being folded
is discontinued, since the shape of the dummy punch paper guide has been
changed.
changed.
(7) To prevent the front and rear tray guides from coming off, their shapes have been
changed.
11. Change in the quantity of screws used for mounting the remote motors A and B
12. In order to improve the productivity, the shape of the antistatic brush has been
changed.
13. Supplementary operation manuals, with reference to additions and changes in the
specifications, have been added in accordance with the software upgrade.
3. Action:
Current parts
New parts
Ref.
No.
Model
name
Version P/G No.
Parts code
Parts code
Price
rank
Parts name
Effective
time
!"#$%&
'()"*$&
)+,-,#.
Note
AR-DC1
200V
series
21-1
TCADZ1500FCZZ
TCADZ1570FCZZ
AD
Installation Manual
(200V series)
(200V series)
2001/10
2
AR-MU1
AR-D13
AR-D14
AR-D14
ALL
11-30
NROLR1335FCZZ
NROLR1335FCZ1
AX
Transport roller 1
2001/11
1
Click on the first or last page to see other AR-P350 / AR-P450 (serv.man70) service manuals if exist.