Read Sharp AR-P350 / AR-P450 (serv.man6) Service Manual online
AR-350/450 BASIC PAPER TRANSPORT PATH AND PAPER EXIT 3-4
3. Finishing operation
This machine allows selection of variable forms of finishing by installing
an option.
A. Forms of finishing and options
4. Finishing operation (AR-FN6)
A. Alignment in offset
1) The joggers F/R are moved to the standby position before paper
entry into the alignment tray, and paper is passed to the alignment
tray.
2) When paper is passed into the alignment tray, the stopper solenoid is
turned on to receive paper.
3) After paper entry into the alignment tray, the joggers are moved to
the suitable positions according to the paper size, and paper is
offset.
4) The stopper solenoid is turned off and the pressure release (roller)
solenoid is turned on to discharge paper to the tray 2.
B. Alignment in stapling
1) Before paper entry into the alignment tray, the joggers F/R are
moved to the standby position, and paper is entered into the
alignment tray.
2) When paper enters the alignment tray, the stopper solenoid is turned
on to receive paper.
3) After paper entry into the alignment tray, the joggers F/R are moved
to the paper size positions to align paper.
4) The paper holder solenoid is turned on at the same time with (3) to
hold the rear edge of entered paper, and the pusher is moved to the
paper size position.
5) After completion of moving the pusher, the paper holder solenoid is
turned off.
C. Stapling
1) The stapler is moved from the staple replacement position to the
slidable position.
2) The stapler is shifted to the stapling position.
3) The stapler is rotated to the stapling position.
Put paper to be stapled in the staple tray.
4) Paper is stapled.
5) The stapler is rotated to the standby position.
When in one-position stapling, a bundle of paper is discharged to the
tray 2 (paper exit section), and the procedure goes to (10)
6) The stapler is shifted to the second stapling position.
7) The stapler is rotated to the stapling position.
7) The stapler is rotated to the stapling position.
8) Paper is stapled. (Second stapling)
9) The stapler is rotated to the standby position.
The bundle of paper is discharged to the tray 2 (paper exit section)
10) After completion of a job, the stapler is shifted to the staple
replacement position.
11) The stapler is rotated to the staple replacement position.
For one-position stapling, however, procedures (6) - (10) are not
performed.
Option
installed
Finishing
Remark
AR-FN6
Offset paper exit A4/B5/8.5 X 11" only
Staple paper exit A4/B5/8.5 X 11" only
AR-FN7
Offset paper exit A3/B4/A4/A4R/B5/B5R
11 x 17"/8.5 x 14"/8.5 x 13"/8.5 x 11"
Staple paper exit A3/B4/A4/A4R/B5
11 x 17"/8.5 x 14"/8.5 x 13"/8.5 x 11"
Saddle +
staple paper exit
staple paper exit
A3/A4R/B4/11 x 17"/8.5 x 11"R
AR-FN7 +
AR-PN1
AR-PN1
Punch
A3/B4/A4/A4R/B5/B5R
11 x 17"/8.5 x 14"/8.5 x 13"/8.5 x 11"
11 x 17"/8.5 x 14"/8.5 x 13"/8.5 x 11"
Paper size
Stopper
Center reference
Paper exit
Jogger R
Jogger F
1
2
4
3
Pressure release roller
Paper size
Stopper
Center reference
Pusher
Jogger R
Jogger F
1
1
2
4
3
5
3
Paper holder
2
6
7
11
10
3
1
4
5
8
9
Staple
replacement
position
' !"#$%
Click on the first or last page to see other AR-P350 / AR-P450 (serv.man6) service manuals if exist.