AR-P300. Service manual - Sharp Copying Equipment Service Manual (repair manual)

ar-p300 service manual
Model
AR-P300
Pages
12
Size
2.53 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service manual
File
ar-p300.pdf
Date
Next: Sharp AR-P300 (serv.man2) Parts Guide

Read Sharp AR-P300 Service Manual online

Parts marked with “
“ are important for maintaining the safety of the set. 
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
NETWORK PRINTER
MODEL
AR-P300
CODE : 00ZARP300/A1E
[ 1 ]  GENERAL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Refer to AR-P350
[ 2 ]  CONFIGURATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2 - 1
[ 3 ]  SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3 - 1
[ 4 ]  CONSUMABLE PARTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4 - 1
[ 5 ]  EXTERNAL VIEWS AND INTERNAL STRUCTURES . Refer to AR-P350
[ 6 ]  UNPACKING AND INSTALLATION. . . . . . . . . . . . Refer to AR-P350
[ 7 ]  DISASSEMBLY AND ASSEMBLY, MAINTENANCE . Refer to AR-P350
[ 8 ]  MACHINE OPERATION . . . . . . . . . . . . . . . . . . . . Refer to AR-P350
[ 9 ]  ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . Refer to AR-P350
[10]  DIAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Refer to AR-P350
[11]  TROUBLE CODES . . . . . . . . . . . . . . . . . . . . . . . . Refer to AR-P350
[12]  ELECTRICAL SECTION  . . . . . . . . . . . . . . . . . . . Refer to AR-P350
[13]  OTHERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Refer to AR-P350
CONTENTS
[00]COVER.fm  1 ページ  ２００４年５月２１日　金曜日　午前１１時３１分
CAUTION
Cautions on laser
Wave length
785 nm
+10 nm
−
15 nm
Pulse times
North America:
35 cpm model: (4.1 µs ± 4.1 ns)/7 mm
45 cpm model: (5.7 µs ± 5.7 ns)/7 mm
Europe:
35 cpm model: (3.8 µs ± 3.8 ns)/7 mm
45 cpm model: (4.4 µs ± 4.4 ns)/7 mm
Output power
0.2 mW - 0.4 mW
At the production line, the output power of the scanner unit
is adjusted to 0.4 MILLIWATT PLUS 8 % and is maintained
constant by the operation of the Automatic Power Control (APC).
 
Caution
This product contains a low power laser device. To ensure
safety do not remove any cover or attempt to gain access
to the inside of the product. Refer all servicing to qualified
personnel.
CAUTION
VORSICHT
ADVARSEL
ADVERSEL
VARNING
VARO!
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. 
AVOID EXPOSURE TO BEAM.
Laserstrahl
UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET UND 
SICHERHEITSVERRIEGELUNG ÜBERERÜCKT. NICHT DEM STRAHL AUSSETZEN. 
USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE ER 
UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLNING.
USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS BRYTES.
UNNGÅ EKSPONERING FOR STRÅLEN.
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRRAR ÄR 
URKOPPLADE. STRÅLEN ÄR FARLIG. BETRAKTA EJ STRÅLEN. 
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄKYMÄTÖNT
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN. 
CLASS 1
LASER PRODUCT
LASER KLASSE 1
For Europe:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
CAUTION
INVISIBLE LASER RADIATION 
WHEN OPEN  INTERLOCKS 
DEFEATED. AVOID EXPOSURE 
TO BEAM.
VORSICHT
UNSICHTBARE 
LASERSTRAHLUNG WENN 
ABDECKUNG GEÖFFNET UND 
SICHERHEITSVERRIEGELUNG 
ÜBERBRÜCKT. NICHT DEM 
STRAHL AUSSETZEN.
ADVARSEL
USYNLIG LASERSTRÅLNING 
VED ÅBNING, NÅR 
SIKKERHEDSBRYDERE ER 
UDE AF FUNKTION. UNDGÅ 
UDSAETTELSE FOR 
STRÅLNING.
VAROITUS!
LAITTEEN KÄYTTÄMINEN 
MUULLA KUIN TÄSSÄ 
KÄYTTÖOHJEESSA 
MAINITULLA TAVALLA SAATTAA 
ALTISTAA KÄYTTÄJÄN 
TURVALLISUUSLUOKAN 1 
YLITTÄVÄLLE 
NÄKYMÄTTÖMÄLLE 
LASERSÄTEILYLLE.
VARNING
OM APPARATEN ANVÄNDS PÅ 
ANNAT SÄTT ÄN I DENNA 
BRUKSANVISNING 
SPECIFICERATS, KAN 
ANVÄNDAREN UTSÄTTAS FÖR 
OSYNLIG LASERSTRÅLNING, 
SOM ÖVERSKRIDER GRÄNSEN 
FÖR LASERKLASS 1.
For North America:
SAFETY PRECAUTIONS
This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the
CDRH standards. This means that the equipment does not produce hazardous laser radiation. For
your safety, observe the precautions below.
●
Do not remove the cabinet, operation panel or any other covers.
●
The equipment's exterior covers contain several safety interlock switches. Do not bypass any
safety interlock by inserting wedges or other items into switch slots.
Caution
Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
[00]COVER.fm  2 ページ  ２００４年５月２１日　金曜日　午前１１時３１分
AR-P300 CONFIGURATION 2-1
[2] CONFIGURATION
1.System Configurations
2. Standard
Category
Model 
Name
Other options required for the installation/mounting. 
(Such option has be ordered separately.)
Remarks
Network printer model 
(31ppm)
AR-P300 •Multi Purpose Drawer (AR-MU1), or Stand/MPD&2000 Sheet Paper Drawer (AR-D13), or Three 
paper drawer stand (AR-D14)
Right upper
exit tray
(AR-TE5)
Upper exit tray 
extension
(AR-TE4)
Finisher
(AR-FN6)
Mail-bin stacker
(AR-MS1)
Stand/MPD & 2000 sheet 
paper drawer
(AR-D13N)
Multi purpose drawer
(AR-MU1)
Cabinet
(AR-DK35)
Stand/3 x 500 sheet 
paper drawer
(AR-D14N)
Saddle stitch 
finisher
(AR-FN7)
Duplex module
(AR-DU3)
Duplex 
module/bypass
tray
Exit tray
(AR-TE3 or AR-DU4 Standard)
[02]CONFIGURATION.fm  1 ページ  ２００４年５月２１日　金曜日　午前１１時３１分
AR-P300 CONFIGURATION 2-2
3. List of combination of peripheral devices
As shown in the table below, some other peripheral devices ( B ) may be needed for installation of a peripheral device ( A ) and some peripheral devices
cannot be installed together.
 
 
 
  
 
 
 
 
Base unit
Sttand with 3 paper drawers
Stand with multi-purpose
drawer and 2000-sheet drawer
Multi purpose drawer
Cabinet 
Saddle stitch finisher
Finisher
Mail-bin stacker
Upper exit tray expansion
Right upper exit tray
Exit tray
Punch module
Duplex module
Duplex module with bypass tray
PS3 expansion kit
Bar code font kit
5GB hard disk drive
Print server card (NIC)
Power supply unit
Base unit
Optional paper drawer
Stand with 3 paper drawers
Stand with multi-purpose
drawer and 2000-sheet drawer
Multi purpose drawer
Cabinet
Optional finishing
Saddle stitch finisher
Finisher
Mail-bin stacker
Upper exit tray expansion
Right upper exit tray
Exit tray
Punch module
Duplex system
Duplex module
Duplex module with bypass tray
PS3 expansion kit
Bar code font kit
5GB hard disk drive
Print server card (NIC)
Power supply unit
Must be installed together.
Any of the units must be installed together.
To install Finisher or Duplex module in Multi purpose drawe
r, Cabinet and Power supply unit are needed.together.
Cannot be installed together
AR-P300
AR-D14N
AR-D13N
AR-MU1
AR-DK35
AR-FN7
AR-FN6
AR-MS1
AR-TE4
AR-TE5
AR-TE3
AR-PN1
AR-DU3
AR-DU4
AR-PK1
AR-PF1
AR-HD3
AR-NC5J
AR-DC5
Electric system options
A
B
[02]CONFIGURATION.fm  2 ページ  ２００４年５月２４日　月曜日　午後８時２４分
Page of 12
Display

Download Sharp AR-P300 Service Manual (Repair Manual)

Here you can read online and download Sharp AR-P300 Service Manual in PDF. AR-P300 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-P300 Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

AR-P300 Service Manuals

Preview DownloadPagesSize
AR-P300 (serv.man2) Rear frame section 2, 17 - Packing material accessories. Parts Guide 8 458.76 KB
AR-P300 (serv.man3) Information of parts change to sections 7-Fusing Unit, 8-Delivery Turn Over Unit, 12-Controller Box Unit. Parts Guide 8 639.72 KB
AR-P300 (serv.man4) Informationof parts changes to sections 1 Exteriors, 5 TC unit, 6 Cassette paper feeder, 7 Fusing unit, 8 Delivery turn over unit, 14 Rear frame section 1, 15 Rear frame section 2, 16 Cassette unit, 17 Packing material accessories. Parts Guide 20 1.33 MB
AR-P300 (serv.man5) Packing material accessories Parts Guide 6 134.79 KB
AR-P300 (serv.man6) Cassette paper feeder, 8 - Delivery turn over unit. Parts Guide 5 379.48 KB
AR-P300 (serv.man8) ARE-902 SMUDGY IMAGE RECEPTION RESULTING FROM INCOMPLETE MG ROLLER ROTATION Technical Bulletin 2 69.87 KB
AR-P300 (serv.man9) ROM upgrade 18 Technical Bulletin 2 10.34 KB
AR-P300 (serv.man7) ARP300 Engine Firmware, This version will upgrade Main and PCU. (Main Vej.10, PCU V9.04A) Driver / Update 5.03 MB

Random: