AR-P27 (serv.man8). Software Setup Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 34

Read Sharp AR-P27 (serv.man8) User Guide / Operation Manual online

32
MAC OS X
14
Configure the printer driver.
• The procedure for configuring the printer driver varies depending on the operating system 
version. The procedure for versions 10.4 - 10.4.8 and the procedure for other versions are 
explained separately below.
• The machine can print using the IPP function. If you wish to use the IPP function, see "Printing 
using the IPP function" (page 34) to configure the printer driver settings.
(1) Click the [Default Browser] icon.
If multiple AppleTalk zones are displayed, 
select the zone that includes the printer 
from the menu.
(2) Click the machine's model name.
• The machine's model name usually 
appears as [SCxxxxxx]. ("xxxxxx" is a 
sequence of characters that varies 
depending on your model.)
• The PPD file of the machine is 
automatically selected.
(3) Make sure that the PPD file of your 
model is selected.
(4) Click the [Add] button.
The PPD file of the machine is 
automatically selected and the peripheral 
devices installed on the machine are 
detected and automatically configured.
(1) Select [AppleTalk].
If multiple AppleTalk zones are displayed, 
select the zone that includes the printer 
from the menu.
(2) Click the machine's model name.
The machine's model name usually 
appears as [SCxxxxxx]. ("xxxxxx" is a 
sequence of characters that varies 
depending on your model.)
(3) Select the PPD file of the machine.
• If you are using Mac OS X v10.1.5, 
select [Other]. The PPD file selection 
window will appear. Click [Startup disk 
name] - [Library] - [Printers] - [PPDs] - 
[Contents] - [Resources] - [en.lproj] - 
"PPD file for your model", and then click 
the [Choose] button.
• If you are using Mac OS X v10.2.8, 
select [Sharp] and click the PPD file of 
your model.
• If you are using Mac OS X v10.3.9, 
select [Auto Select].
(4) Click the [Add] button.
If you are using Mac OS X v10.3.9, the 
PPD file of the machine is automatically 
selected and the peripheral devices 
installed on the machine are detected and 
automatically configured.
If you are using Mac OS X v10.1.5, this completes the configuration of the printer driver. If you 
are using a version other than Mac OS X v10.1.5, go to the next step.
v10.4 - 10.4.8
(1)
(2)
(4)
(3)
v10.1.5, v10.2.8, v10.3.9
(1)
(2)
(4)
(3)
The PPD file is installed in the following folders on the startup disk.
[Library] - [Printers] - [PPDs] - [Contents] - [Resources] - [en.lproj]
Note
!!install_arp27_Eng.book  32 ページ  2007年1月11日 木曜日 午前9時7分
Page of 127
Display

Click on the first or last page to see other AR-P27 (serv.man8) service manuals if exist.